lq9 times

[most-hated]

And this is still with traction issues waiting on jl for the vids dawm my trucks launch looks killer 12.3@109mph 7.8 1/8th 1.77 60ft

YouTube - La Joker 12.3



mods New Setup 6.0 ms3 cam,3800 QC ,4.10's tru trac,
full bolt on ,tune by dan

[skeet]

thats a good run bro!!! youre heads? they hadnt been worked?

[most-hated]

There 862 milled 10 2.0 valves and ported

[skeet]

There 862 milled 10 2.0 valves and ported

thats the problem lol, j/k but some 243 milled and ported would put you into the 11's maybe mids!!

[ducky]

badass run! updated you on the FTL. check it out make sure its right

[most-hated]

thats the problem lol, j/k but some 243 milled and ported would put you into the 11's maybe mids!!

if i get 243s do i mill em 30 and bout the port wat do i tell the guy cuz i dont know that much bout heads

[most-hated]

badass run! updated you on the FTL. check it out make sure its right

perfect

[Z88 sd]

nice run!

[skeet]

ms3 works better with 5.3 heads

they may work better, but it would be better if they had 2.02 valves

thats a nice cam, 237/242 .603/.609" 113LSA i would think any head would need heavly porting so that cam could breathe.

[most-hated]

Well the heads i have have the 317 head valves i bealive those are 2.0 right ? and bout the port exhaust and intake look way bigger then the 317s so wat do yall think oh and i have a 3 angle valve job , but like i tell yal im new to the head thing so im still learning