+ Reply to Thread
Results 1 to 2 of 2

Thread: transmission fluid

  1. #1
    Join Date
    Oct 2003
    Location
    stuttgart,ar
    Posts
    49
    I just changed the transmission oil & filter,how much fluid
    do I put in?
    2000 SWBRC 5.3,radix,e-fans,no cats,true duels
    2 21/2in delta force race muffs,4.10 with eaton
    e-locker.Descreened MAF & throttlebody bypass.
    FLP level 5 4L65E,PI 3000 stall,Dynatech headers
    Nelson tune

    2005 GMC 2500HD 4door 4x4

    1989 Chevy Suburban 4x4 ( Sir Leaks-a-Lot )

  2. #2
    Join Date
    Mar 2003
    Location
    San Marcos Texas
    Posts
    4,393
    Start with 6 quarts. It will probally take 7 to 9. Start it up, put in R then D and recheck the fluid. Don't top it off until the fluid is fully up to temperature. Drive it and recheck it. When it gets close to full I only add 1/2 quart and then recheck it. You might have to put in and pull out the stick a bunch of times(wiping it off each time) to get a good reading as the fluid will keep dribbling down the fill tube. Don't ever overfill it. Good luck!
    2006 Superior Blue Trailblazer SS AWD, Stock as a rock

    Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).

    Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts