hey guys been checking the site out and found some good info and looking to get even more I have a 02 ecsb 5.3 with recent lt's and 3" ory, k&n cai, gibson catback and torque management off just ran 15.05 and tryin to get in the 14s
hey guys been checking the site out and found some good info and looking to get even more I have a 02 ecsb 5.3 with recent lt's and 3" ory, k&n cai, gibson catback and torque management off just ran 15.05 and tryin to get in the 14s
Last edited by 1slow02; 04-20-2008 at 06:18 PM.
Welcome to the site!!! Do you have a tune?
yeah a buddy has a hp tuner and did the trans but hasn't done fuel and spark yet
02 ecsb small motor, small cam, small shot
welcome to the site
06 silverado CC Volant CAI/ Corsa Sport exhaust
dynatech supermaxx headers/cats
LPE GT2-3 cam/ Comp 918's/ Rods
Eaton LSD 3.73's
IAT Shocks
DANNY TRANNY w/2800 TCS billet verter
275HP and 293TQ Pre Cam
314HP and 303TQ post cam
Welcome to another AZ member
2006 GTO M6 Brazen Orange
2006 Silverado CCSB Duramax
Welcome to LS1truck! IF you are running 15.05 with no real tune for the motor, then you should easily drop into the 14's once you tune it correctly. What other mods are you thinking of doing for your truck?
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
hey thunder where in Phoenix you at. And as far as future mods I've been thinkig about e-fans but want to get the most bang for the buck. a corvette servo is probably gonna be next from a buddy that never got around to putting it on
02 ecsb small motor, small cam, small shot
I live up in north Phoenix by the I-17 / 101 interchange. You?
2006 GTO M6 Brazen Orange
2006 Silverado CCSB Duramax
E-fans do help, and the servo is flippin easy. E-fans can get complicated if you don't have a Variable Speed Controller or wiring harness. You can get a plug and play kit from several different manufacturers, or you can buy stock e-fans or some LS1 fans. Either way you do it, you need a wiring harness...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
up by MMI right? by yorkshire/deer valley area?Originally Posted by thunder550
Posting Permissions
Reply With Quote
