+ Reply to Thread
Results 1 to 2 of 2

Thread: What parts do I need for head swap?

  1. 01-29-2008 09:03 PM #1
    Kros383SS's Avatar
    Kros383SS
    Kros383SS is offline The Neverending Project!
    Join Date
    Aug 2007
    Location
    Needville,TX
    Posts
    433

    What parts do I need for head swap?

    Im swapping a fairly new set of #317 heads on my 6.0

    Do I need new head bolts? Im gonna use new head gaskets
    And would it be a good time to install LS6 springs? Even though Im not changing cams yet!!
    89' GMC RCSB 6.0L LQ4, T56, 4.56 Gears
    Reply With Quote Reply With Quote
  2. 01-29-2008 09:55 PM #2
    HotRodV6 Guest
    yes you will need new bolts, the stock ones are torque to yield and one time use only. Also if your not putting in a bigger cam yet, then i wouldnt mess with the springs, its easy enought to change them later. But LS6 springs might be ok with the stock cam, im not sure.
    Reply With Quote Reply With Quote
+ Reply to Thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules