+ Reply to Thread
Results 1 to 3 of 3

Thread: WTB cam

  1. #1
    Join Date
    Dec 2007
    Posts
    133

    WTB cam

    want something that will sound nasty but still streetable if that makes any since, let me know what yall got!
    1999 5.3 ex cab 3/5 drop, k&n CAI, BBK 80mm TB, Pace setter longtubes, 3" ory, hooker aero muffler, TS 224r cam w/112 lsa, comp cam 918 springs, TS chromoly pushrods, 180 degree thermostat, Nelson tune, 3 angle valve job, electric fans, 28x11.50 et streets

  2. #2
    Join Date
    Dec 2003
    Location
    Newark, Tx.
    Posts
    1,303
    If you get something that sounds aggressive, you will need supporting mods to go with it, i.e. stall, exhaust, valve springs.
    '92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
    http://videos.streetfire.net/video/d...d700c6401f.htm
    New project: '00 S-10 ext. cab, ZQ8, 370, T-56, daily driver.

  3. #3
    Join Date
    Nov 2007
    Location
    DFW, TX
    Posts
    231
    hit the boards and find a LPE GT2-2 or the more common LPE GT2-3......this is the hands down best baby cam and it is every where on every board......you can find used ones all over the place.....pull the old cam and stuff the new cam.....

    we have TBSS guys stuffing the cam in and racing with nitrous without even retuning and it runs better then they eeke out a little more with a specific WOT dyno adjusted tune to max the AFR in that 12.9-13.1 sweet spot.......
    "old age and treachery will always overcome youth and ambition"
    author unknown

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts