Anyone around Austin with tuning software??

[85mudblazin]

I am needing to back off a few degrees of timing for the n20 but I hate to have to send mine back to Wait 4 me just for that.

So if anyone could help me out I would be willing to kick ya a few bucks.

-Chris

[farmtruc]

I'll just put this out there, come on down, the tune is $375 and you're set, free retunes and we'll hook up the wideband and scanning software to dial in the a/f ratio and check for any KR.
You may not need to pull any timing if the timing table is convervative to begin with.

later,
allen

[85mudblazin]

I'll just put this out there, come on down, the tune is $375 and you're set, free retunes and we'll hook up the wideband and scanning software to dial in the a/f ratio and check for any KR.
You may not need to pull any timing if the timing table is convervative to begin with.

later,
allen

Im going to be buying HPTuners from you really soon (next on the list) so id hate to have to spend the $375 for a full tune.
I am going to be installing a wideband LC-1 gauge with the juice so I can keep a eye on that, just worried about the KR.

So say I buy HP Tuners from you would you be able to walk me through getting the n20 setup correctly??

Thanks for the help BTW.
-Chris