2001 6.0L

Hey Guys,
I just picked up a complete, very low mile 6.0L.
Comes complete, minus engine harness and PCM.
It also incluldes all the a/c stuff, lines, dryer, compressor.
All front accessories, belts, intake cover, complete intake.
Includes manifolds as well.
It also has all the bell housing bolts, exhaust studs and ground straps.

I personally helped pull this engine from a wrecked 2001 HD and it had just a tad under 20K miles.

I'll start it up this week to confirm everything is operational.

asking $1850.

thanks,
allen

Sounds like a bargain to me. Too bad it doesn't have an aluminum block or it might have ended up in my POS. Deals like that never are available when I'm seriously looking for one. Someone's going to get a hell of a deal there. :thumb:

<div class='quotetop'>QUOTE(RedHeartbeat &#064; Jun 26 2006, 11&#58;21 AM) [snapback]56322[/snapback]</div>

Quote:

---

Sounds like a bargain to me. Too bad it doesn&#39;t have an aluminum block or it might have ended up in my POS. Deals like that never are available when I&#39;m seriously looking for one. Someone&#39;s going to get a hell of a deal there. :thumb:
[/b]

---

I got a can of silver paint... just tell people its not iron. :wave:

:thumb: good find

<div class='quotetop'>QUOTE(hummertech &#064; Jun 26 2006, 03&#58;12 PM) [snapback]56325[/snapback]</div>

Quote:

---

I got a can of silver paint... just tell people its not iron. :wave:
[/b]

---

I would but time slips never lie. :smile: 100 lbs = .100 additional time at the finish line. :thumbdown:

<div class='quotetop'>QUOTE(farmtruc &#064; Jun 26 2006, 12&#58;33 PM) [snapback]56321[/snapback]</div>

Quote:

---

Hey Guys,
I just picked up a complete, very low mile 6.0L.
Comes complete, minus engine harness and PCM.
It also incluldes all the a/c stuff, lines, dryer, compressor.
All front accessories, belts, intake cover, complete intake.
Includes manifolds as well.
It also has all the bell housing bolts, exhaust studs and ground straps.

I personally helped pull this engine from a wrecked 2001 HD and it had just a tad under 20K miles.

I&#39;ll start it up this week to confirm everything is operational.

asking &#036;1850.

thanks,
allen
[/b]

---

Trade for 5 stickers?

Man that&#39;s a sweet deal...I wish I had the funds right now.


Good luck selling it&#33;

<div class='quotetop'>QUOTE(RedHeartbeat &#064; Jun 26 2006, 01&#58;37 PM) [snapback]56333[/snapback]</div>

Quote:

---

I would but time slips never lie. :smile: 100 lbs = .100 additional time at the finish line. :thumbdown:
[/b]

---

i went on a diet and lost 70lbs, i am going for another 50lbs before sept. does that count???

<div class='quotetop'>QUOTE(hummertech &#064; Jul 7 2006, 12&#58;27 AM) [snapback]57316[/snapback]</div>

Quote:

---

i went on a diet and lost 70lbs, i am going for another 50lbs before sept. does that count???
[/b]

---

You might live long enough to go the the track. :smile:

Congrats on the weight loss. Sounds like you just cut .07 off of your 1/4 mile times. :thumb:

How would that motor work with a 99 V6, would i need a new computer and harness???

<div class='quotetop'>QUOTE(hummertech &#064; Jul 7 2006, 01&#58;27 AM) [snapback]57316[/snapback]</div>

Quote:

---

i went on a diet and lost 70lbs, i am going for another 50lbs before sept. does that count???
[/b]

---

damn&#33;&#33; congrats, give me some tips&#33; i need e.t. reductions also&#33;&#33;&#33; :lol:

Where would I look to get a ecm and harness if I did buy this setup and about how much would it cost? I&#39;ve been looking into LS1&#39;s and LT1&#39;s to go in my dad&#39;s &#39;64 Chevelle we&#39;re restoring, but this might be a good route to go.

A stock harness won&#39;t be hard to find. Allen can build you a nice clean custom harness and supply you with a PCM tuned and ready to go, too. That&#39;s his business.

<div class='quotetop'>QUOTE(RedHeartbeat &#064; Jul 14 2006, 02&#58;34 PM) [snapback]58099[/snapback]</div>

Quote:

---

A stock harness won&#39;t be hard to find. Allen can build you a nice clean custom harness and supply you with a PCM tuned and ready to go, too. That&#39;s his business.
[/b]

---

Thanks Red,

Check out my site and you&#39;ll see the ls1 harness, the truck harness is very similar, just a different intake.

thanks,
allen

<div class='quotetop'>QUOTE(farmtruc &#064; Jul 14 2006, 03&#58;43 PM) [snapback]58101[/snapback]</div>

Quote:

---

Thanks Red,

Check out my site and you&#39;ll see the ls1 harness, the truck harness is very similar, just a different intake.

thanks,
allen
[/b]

---

Would you have a good source for the matching trans. (?? 4L80e ??) for a reasonable price?

I&#39;ve got a 97 4L80E out of a 1 ton truck I&#39;d part with for &#036;900. I didn&#39;t get to see it run but it supposedly drove the truck onto a flatbed trailer without any issues. That&#39;s what core transmissions go for most anywhere that has a 4L80E available. Used ones with a 30 day gaurantee around here are &#036;1500 at the bone yards.

Is this engine still available? Would be perfect for my Blazer.

New price &#036;1700, I have two people coming to look at it next week.

thanks,
allen

It&#39;s a good thing you didn&#39;t have that laying around when I was down there. It wouldn&#39;t have taken much to talk me into it. :laugh:

Will you ship this engine??

Allen, feel free to bring it with you when you come get the tranny.

Sure, I shipped an engine to Denver and I think it was under &#036;145.

allen

Allen, let me know who shipped it for that little &#036;&#036;. The lowest I got quoted for these bare blocks was 190.00.

Man, they saw you coming&#33; :laugh:

There&#39;s a guy over on LS1Tech that does expediting and gets everyone really good rates for shipping large or heavy items by truck. I can&#39;t remember his name but you can search the for sale section for shipping to find out who it is.

How much extra would it be if you included an engine harness and PCM to run in a 72 Blazer? Also, if you could give me a quote on shipping to 92020, I&#39;d appreciate it.

Thanks,
James

pm sent allen

anyone know if this engine is still for sale?