L92 intake throttle cable bracket

Assuming others have done this. Not sure where I can find a bracket for a cable throttle body for a 6.2 truck intake. Anyone have any advice or options? Throttle body is an edelbrock 90mm.

Iv been searching for the exact same thing....with no luck. If you find anything be sure to share!

Will do for sure. So far it seems like the one from ws6 project for the car intake might be the best option with a little modifying to clear the evap hose

I bought the cable bracket from ws6project and have it installed i just need to reroute pcv line, so far im pleased with it.

What one did you buy? The one that bolts to the back of the tb? And what tb are you running?

chevyman94 will you post a pic?

i bought the ls holley cable bracket its a 95mm part number 20-147, it bolts up in between the throttle body and the intake, and the gaskets are included. Website was
ws6store, as far as the throttle body i just bought a 92mm ls2 4 bolt design off of ebay.

there was no problem with the difference in size of the tbody compared to the flange piece? Seals all tight? Any pictures actually ?

i didnt' find any issues when i was putting it together. after install i started it up and checked for leaks and i didnt' find any.

That looks nice actually. Wonder if I would run into any issues on a 90mm tb. I don't think I would after seeing that one. Yours is only 2mm bigger. Thanks for the picture!

thanks chevyman! that looks awesome, just ordered one from Jegs. $30.10 free shipping

Im not sure on a 90mm the description i read said it would fit on a fast or stock intake so i would imagine you would be ok, i was in the same boat as you guys i was trying to come up with a bracket that would work. i was in the process of designing my own setup untill i came across this setup. so i decided to try and see.

Chevman how do you like the ebay 92mm throttle body?