Printable View
was on my 2008 silverado reg cab with 1350 yokes and trans was a 6l90e
$450
heres a pic when new next to a oem
heas seen speed of 155 with no issues/vibrations etc
http://i244.photobucket.com/albums/g...ade1/shaft.jpg
http://i244.photobucket.com/albums/g...de1/shaft2.jpg
Keep in mind if your truck requires a shorter drivershaft, this would be an excellent shaft for rework!!
Just to add, it's not the cheap thin aluminum, this is good quality aluminum and billet yokes.
Damn thing was over $600 new.
This would be a perfect shaft for an 80e setup, regcab. As you can see the new shaft is longer, which can be cut down to accept the 80e stuff.
funny how the 6L90e is shorter, hmmm.
this is a big dog shaft no b.s
Might help the sale if you posted the center joint to center joint measurement. Glws
How does this compare to a 99-07 classic rcsb 2wd shaft? Length wise?
center of u joint to other center end is 60'' inches.
Would this even be close on a ecsb 2000 with an 80e swap?
Don't think so
How long is it
U joint mount to u joint mount is 60 inches 400 and it's yours
mines the exact same lenght if i had the money id buy it off ya, if you have it in 2weeks ill buy it off ya 400 include shipping
400 doesnt include shipping ...its not worth shipping :( where u from?
dallas. irving to be exact
If you ever come toward sa lmk
Alright
bump.......
back to the top...$400 takes it and can be picked up at Nelson performance
i just measured my 02 rcsb and its 58'' inches ...all this one need is to be cut back and it will work :D
Sold...........