-
Project Infinity
I call this Project Infinity, mostly because it will take me ages to get where I want it to be, just because I'm still in school and only work a part-time job.
2004 GMC Sierra SLE Extended Cab 2WD
5.3 4L60E
Here's when I first got her:
http://i225.photobucket.com/albums/d...IMAG0117-1.jpg
http://i225.photobucket.com/albums/d...IMAG0118-1.jpg
http://i225.photobucket.com/albums/d...IMAG0116-1.jpg
http://i225.photobucket.com/albums/d...2/IMAG0136.jpg
Bought her with 140k miles, magnaflow exhaust and K&N CAI. It ran a 15.3 in the 1/4.
Took all the useless crap off and debadged her next:
http://i225.photobucket.com/albums/d...IMAG0186-1.jpg
http://i225.photobucket.com/albums/d...2/IMAG0190.jpg
2" shackle and painted the reflectors in the headlights:
http://i225.photobucket.com/albums/d...2/IMAG0258.jpg
http://i225.photobucket.com/albums/d...IMAG0245-1.jpg
Headlights stained soon after, so I bought new ones:
http://i225.photobucket.com/albums/d...2/IMAG0276.jpg
Added a Hypertech programmer, and bought me a set of track wheels and tires..
http://i225.photobucket.com/albums/d...2/IMAG0122.jpg
With the hypertech it ran constant 15.1's... After a getting some recommendations got a tune from a buddy and it ran a best of 15.01's
FUTURE PLANS:
Engine/Trans:
224/Z06 Cam
3200 stall
4.10 gears
Trans cooler
Efans
LT's
Exterior:
Cowl Hood
Colormatched
2/4 Drop
Roll pan
and hoping to bring the truck to a 13.9 or extremely low 14 second pass..
-
-
Got some stuff in for the truck this christmas..
http://i40.tinypic.com/r9rk8z.jpg
http://i44.tinypic.com/s29s92.jpg
Now just need to find time to install the headers... Probably wednesday.. any tips for the install?
-
you need to get a nelson tune, i shaved 6 tenths off my 1/4 mile by just calling him up, tips for long tube install, jack the truck a mile off the ground and go from underneath.
-
I do have a tune from somebody.. but id rather first focus on getting parts before I get a nelson tune..
-
Got a new set of rubbers on the truck! Going from 0.000001% tread to 100% tread, and wow this thing hooks and leaves damn fast!
went from a 255 70r16 to a 265 70 r16
http://i44.tinypic.com/2zrfj1g.jpg
http://i40.tinypic.com/30j0jft.jpg
-
Well, my headers are on!
It was pretty easy to get the old ones off, just a PITA.. I got my muffler off, and thought it would be easy the rest of the way.. got to the Y-pipe and 4 bolts out of 6 stripped.. so I went to the next thing and started on the manifold bolts.. I went to feel how loose they are and found out that the back bolts on both sides have already been snapped off.. so I was a little mad.. all the others came out like butter thanks to 2 1/2 days of PB Blaster. Went under the truck again to cut the y-pipe so I could pull them out. Installed the new headers and ORY. Everything slipped on nice, except the muffler, so I was running around with just a ORY for 1 1/2 days, it was a PITA, lol.. EVERYTHING was rattling inside the truck.. Muffler is now on with 3" piping all the way back and it sounds AMAZING, a little quieter than my old set up but like I said, it sounds amazing.. Also got the Service air bag light while putting the headers in because I pulled the steering column intermediate shaft and the steering wheel wasn't secured and spun a few times and snapped the clockspring..
Here's a little video of how it sounds right now... I'll get one of a few revs later..
http://www.youtube.com/watch?v=MI2zb...4bAUAAAAAAAAAA
http://i42.tinypic.com/vhaupu.jpg
http://i41.tinypic.com/2ilm04k.jpg
http://i41.tinypic.com/dvhqg7.jpg
The two broken back bolts.. dont have exhaust leak, so I should hopefully still be good,lol.
http://i44.tinypic.com/205qbts.jpg
Some sparkplug carnage from pulling the headers out, lol..
http://i42.tinypic.com/168sknb.jpg
In total, the header install took about 6 hours with all the problems we ran into..
-
looks good bro, glad you got it all bolted up! holler at me when you decide to do a cam swap!
-
Dropped the grill, roll pan, and some under hood stuff off at my buddys to get painted... this thing is gonna look sexy as f*ck!
What would you guys do with my grill? I can't decide if I want to keep the stock insert and put a silver emblem on it, or get another billet insert..
-
-
Got the Roll Pan and emblem on, just waiting on the upper bumper insert..
http://i44.tinypic.com/34zxfr9.jpg
http://i40.tinypic.com/znq59d.jpg
-
your truck is looking good! whats next?
-
Hes going to buy my 4.10's right Fabian.... ;)
-
truck is looking good man. Where do you usually run your truck
-
I usually run it at No Problem, but haven't been there in a year.. Last time its ever been at the track was at the LS1Truck Shootout and it ran a 14.699@95
Also, some new updates I installed the hangers and will be posting a few pics of it later..
Thanks for checking in!
-
cool we just ran at no problem 2 weeks ago
