no longer for sale
Printable View
no longer for sale
why'd you take the heads off to swap cams, thats old school man, how many miles is on it and 900 for any year 5.3 is pretty steep. good luck though
wayyy steep the only difference in a newer 5.3 is active fuel management vally cover. for 1250 you can get a low miles 6.0 long block with intake.
Actually the newer 5.3s have better flowing heads, and the flat top pistons should give it a little higher CR.Quote:
Originally Posted by MidnightRider
799s are the same as 243s, but regardless, you can buy a 5.3 and some 243s way less.Quote:
Originally Posted by low91
it has 1,000 miles on it
it had DOD lifters which in turn to run a bigger cam you have to change lifters if not then you'll be buying a new cam an such again. it has a 90mm intake just like a TBSS has so you can run a 90mm 4 bolt tb.
lifters are 130 plus shipping
head gaskets are 65
lifter trays are 50
LS2 valley cover 150
head bolts 60 plus shipping
it comes with everything i got with it. all i did was pull the motor apart to start the lifter swap for the cam swap. i numbered every rocker arm an push rod.
tb coils complete intake manifolds motor mounts heads valve covers
900 is cheap imo an 1250 including all the parts ive already bought is a deal too
im going with a bigger motor in my CC so ill have a 25k 5.3 motor to use.
buy a higher mileage motor, buy 243s an mill em to make a higher compression.
they have people selling these 5.3s as a short block for 800.00 with higher mileage. i think im being fair because i paid shipping and taxes on the parts and taxes on the motor which you dont have to.
interested in selling just the heads?
your price for that motor is actually pretty decent.
figure 243s go for 400 bucks and 5.3s go for around 550
good luck with sale
thats cheap bro,if i had the cash ide buy it
2008 SILVERADO 1500 PICKUP ENGINE ASSEMBLY:eBay Motors (item 370227877079 end time Nov-07-09 12:02:27 PST)
now thats steep and its a 4.8^^
thanks guys
ive never seen a 1000 mile motor go for this cheap, i just want whatni have in it bc im going with a 6.0 in my 08 CC an will have a 5.3 to use. my fiance's camaro is getting a forged 5.3 in due time an im not willing to spend as much as i did on this just to make it work in her car.
id like to keep the heads together if i find a buyer for motor an heads at the same time then ill seperate
600.00 for short block
250.00 for heads or 325 for rocker arms, push rods, valve covers
150 for intake, fuel rails, injectors
100 for 4 bolt 87mm DBW TB
100 for the whole set of coils
thats what everythings going for on all the other sites if not more
900 for all is a good deal i think