Light 17" wheels???

Guys, i do sand drags most of the time and that's why I bought 285-70R17 BF Mud terrains, they perform very nice in the sand but as you should know they kill me in the street.. I'm looking for a set of 17" wheels in the 8.5-10" width range that are lighter that my 45-50lbs stock wheels to try to compensate the weight I add with the mudders instead of my stock tires.. The lighter the better.. I really like centerlines stingrays but I'm not sure if they are light or they are made in 17"..
(I was going to buy dick cepek DC-1's 24lbs each but i don't like them that much, they just got my attention cause of the weight)
Should I look for aluminum wheels? Forged? Or what kind of wheels are lighter??
Thanks!

Quote:

---

Originally Posted by White Devil

....I really like centerlines stingrays but I'm not sure if they are light or they are made in 17"..

---

They are made in 16", 17", 18", 20", and 22".

Billet aluminum are pretty dang light. They are stronger and lighter than your stock wheels. But if you wanted to spend some real $$$, you could buy some ultra light Magnesium wheels...

Centerline Wheels
here ya go 17's they are 20lbs should be light enough

damn i want a set but 800 bucks is alot for some 18s and no tire

Quote:

---

Originally Posted by static04

damn i want a set but 800 bucks is alot for some 18s and no tire

---

aww those are billet you will not find another billet wheel that cheap.

oh yea i know i just dont want to spend that much on wheels right now lol

Quote:

---

Originally Posted by murdered_outgmc

aww those are billet you will not find another billet wheel that cheap.

---

+1

Somebody told me here on the forum that my stock wheels where 45-50lbs a piece.. I just did a lot of weighting yesterday and my stock wheels turned out to weight 20lbs.. The stock tires that came from factory 31lbs and the mudders that Im running right now weight 57lbs.. 26lbs of difference between the factory tires and mudders :/
so, 20lbs are hard to beat in my opinion.. 17" Stingrays weight around the same..

lookup the pro comp 1069 and/or 1079 series for 6 x 5.5 and there is a set of 17 x 9 tht weight 22 lbs. in hubcentric. i acctually run my slicks on the 1069 (non beadlock version) 16 x 10

btw the procomp wheels are cast alluminum for 140 each @ 4wheelparts.com

Quote:

---

Originally Posted by $nake Charmer

lookup the pro comp 1069 and/or 1079 series for 6 x 5.5 and there is a set of 17 x 9 tht weight 22 lbs. in hubcentric. i acctually run my slicks on the 1069 (non beadlock version) 16 x 10

---

pics? would they tuck the offset says otherwise but idk about backspacing sizes im looking at the 18x9s