tranny crap

Printable View

07-13-2009, 08:14 AM
blazedchevy

tranny crap

well its been about three months now i've gone without my tranny i ordered a kit that is good for about 750+hp.And tranny guy biult this for me,and me and him have been going rounds about this thing everything works perfect on the unit.But as soon as i give it some power and click third i burn the 3 4 clutches up.Now i've noticed that it hits lock up in third right away it never used to do this with the old one.What do you think cold be happen to it to burn up the last one lasted 35miles jamed on it twice and done he tells me my crap is making to much power for it to hold.What do you guys think
07-13-2009, 06:36 PM
Madd Maxx

Just show him your timeslip - that proves that your crap isn't making too much power.
07-13-2009, 07:30 PM
WARLOCK

Quote:

Originally Posted by Madd Maxx

Just show him your timeslip - that proves that your crap isn't making too much power.

Do you ever have anything positive to say?
07-13-2009, 07:31 PM
RedHeartbeat

did he resurface the pump to get it flat? Many rebuild the pump without doing the most important operation, gaurantying that the pump and flat and doesn't have crossleaks. I've killed many 60e 3-4 clutch packs and I too have neglected the pump resurfacing, most likely leading to my clutch failures since everything else was solid. The next time I go through my 60e, when I get it back from Tyler, is to get the pump checked and resurfaced then rebuild it and put it to the test in someone's truck to see if I got it right.
07-13-2009, 08:24 PM
Madd Maxx

Quote:

Originally Posted by WARLOCK

Do you ever have anything positive to say?

The OP claims he ordered a 750+ HP tranny build and now he's burning clutches. He's been going rounds about this thing (his words) with the builder, who claims he's making too much power. I sugested the OP show him his timeslip to verify how much power he's actually making (I would estimate a little under 500 HP). That puts the ball back in the builder's court to resolve the issue.

Perhaps it's you who is demonstrating the negative thoughts.
07-13-2009, 08:39 PM
GasGuzzler

Nope. Proven fact.
07-13-2009, 10:43 PM
WARLOCK

Quote:

Originally Posted by Madd Maxx

Just show him your timeslip - that proves that your crap isn't making too much power.

I was referring to this part.
07-13-2009, 10:44 PM
WARLOCK

Quote:

Originally Posted by GasGuzzler

Nope. Proven fact.

Thanks for backing me up Nate
07-13-2009, 10:54 PM
GasGuzzler

It wasn't for you...it was for all the people :LOL:
07-13-2009, 11:06 PM
Madd Maxx

Quote:

Originally Posted by WARLOCK

I was referring to this part.

Perhaps if you took the time to read the thread before opening your mouth, you'd have one less foot in it. Read the OP's original post - better yet, I'll quote it for you:

Quote:

Originally Posted by blazedchevy

. . . he tells me my crap is making to much power for it to hold.

Those were his words, not mine.
07-13-2009, 11:10 PM
Madd Maxx

Quote:

Originally Posted by GasGuzzler

Nope. Proven fact.

There's just no limit to your pettiness, is there? You are such a sad, little man . . .
07-13-2009, 11:11 PM
GasGuzzler

At least I'm a man. :spit:

^^^ :ghey:^^^
07-13-2009, 11:13 PM
rutroe

:popcorn:
07-13-2009, 11:14 PM
WARLOCK

Quote:

Originally Posted by GasGuzzler

At least I'm a man. :spit:

^^^ :ghey:^^^

He shoots.........He scores! :dancenana::greg::dancenana:
07-13-2009, 11:18 PM
GasGuzzler

Quote:

Originally Posted by WARLOCK

He shoots.........He scores! :dancenana::greg::dancenana:

I had my toe on the three point line though. Wait 'til you see the half court shot coming up! :greg:
07-13-2009, 11:32 PM
WARLOCK

Quote:

Originally Posted by GasGuzzler

I had my toe on the three point line though. Wait 'til you see the half court shot coming up! :greg:

I cant wait.
07-13-2009, 11:38 PM
DBRODS

:hyper2:
07-14-2009, 05:15 AM
blazedchevy

Quote:

Originally Posted by Madd Maxx

The OP claims he ordered a 750+ HP tranny build and now he's burning clutches. He's been going rounds about this thing (his words) with the builder, who claims he's making too much power. I sugested the OP show him his timeslip to verify how much power he's actually making (I would estimate a little under 500 HP). That puts the ball back in the builder's court to resolve the issue.

Perhaps it's you who is demonstrating the negative thoughts.

yea, my claim is real the kit i bought is from tranny shop called "probuilt automatics" the actual kit is a pro street elite.
The point I was trying to make in my original post is wot going in to 3rd
it automaticly goes in to lock up..
Now to my understanding theres two reasons it could occur 1-being the tune,
how ever I never tuned it to do so..2-being check ball in one of the veins inside the valve body, thus forcing it in to lock up right away in 3rd

this is in all seriousness im looking for answers not wise cracks
no negitivity toward any ones post just frustrated !!!
07-14-2009, 05:22 AM
blazedchevy

Quote:

Originally Posted by RedHeartbeat

did he resurface the pump to get it flat? Many rebuild the pump without doing the most important operation, gaurantying that the pump and flat and doesn't have crossleaks. I've killed many 60e 3-4 clutch packs and I too have neglected the pump resurfacing, most likely leading to my clutch failures since everything else was solid. The next time I go through my 60e, when I get it back from Tyler, is to get the pump checked and resurfaced then rebuild it and put it to the test in someone's truck to see if I got it right.

all hard parts are new,including the pump no reman.
i agree with your pressure loss ,because if my tranny does apply lock up under wot it would take pressure away from the forward drum and apply it to the converter witch would make it burn up 3,4 clutch pack,
right?
07-14-2009, 08:05 AM
COWL327

I think that 4l60s should b banned from the planet...or better yet....send them to china!They are perfect for Chinese products! I found my saving grace yesterday...04 80e 66k miles for 500.00 90 day warranty.Im selling my 60 if anybody wants it.BTW I am so tird of builders that want to blame me for there inability to build a quality trans.Just fix the damn thing!!!!!!!!
07-14-2009, 08:53 AM
blazedchevy

Quote:

Originally Posted by COWL327

I think that 4l60s should b banned from the planet...or better yet....send them to china!They are perfect for Chinese products! I found my saving grace yesterday...04 80e 66k miles for 500.00 90 day warranty.Im selling my 60 if anybody wants it.BTW I am so tird of builders that want to blame me for there inability to build a quality trans.Just fix the damn thing!!!!!!!!

THATS WHAT IM TALKIN ABOUT, I DONT CARE HOW DID WHAT DID OR WHEN JUST FIND THE PROBLEM AND FIX IT