Printable View
SOLD!!!
Well I bought these off a buddy then my dad and a another buddy talked me out of installing them so noe im trying to sell them. $120 shipped with hardware. There $200 new and really if u think about it there is no diff.
Mods if I need to post the other hanger and hardware just let me know.
http://i366.photobucket.com/albums/o...n/DSCN0501.jpg
Selling these will go to my much needed converter fund. LOL!!
why were you talked out? not an easy install, but nothing you can't handle.
Well my dad drove by in my truck and it sits level cruisin and I dont want it to bulldog which it will lowered 2 more inches and on top of that now that I got the OEM 20's it would rub bad.
o yeah, we have the same drop! lol. go ahead and sell them, good luckQuote:
Originally Posted by 06 4.8
TTT Any offers?
I've already got the Shackles but am interested in another 2 inches of drop. You know if it will work with 285/50/20s?
i would say yes, but it also depends on the offset of the wheelsQuote:
Originally Posted by timothy_james07
They are the boss 330s. Not sure what the offset is.
IMHO i don't see an issue. the back isn't a big deal and you can always roll the fendersQuote:
Originally Posted by timothy_james07
What's the best way to do the front?
that's opinion. you can do drop spindles or springs. or be a cheapy like me and cut your stock springs. springs will start to sag after some time. i would go with spindles myselfQuote:
Originally Posted by timothy_james07
did you just cut one coil off each side? i have an extra set i might play around with
i cut about 3/4s of a coil off. i would say it dropped it about an 1"Quote:
Originally Posted by timothy_james07
Timothy James07 There should be no problem gettin them to fit.
The guy I got them from had them on 305/45/22 he only sold them cuz he went 26's
I'm not too worried about the back. Just want to make sure I can get the front to tuck without any problems
I have a 2/4 drop with the stock 20's, and they fit no problem
still have these?