does anyone know the torque sequence for the intake manifold?
Printable View
does anyone know the torque sequence for the intake manifold?
Yeah--do what Quik said--but don;t tighten down ALL the way on the first pass. Just get them snug the first time, then really tighten them down on the second pass...
x pattern huh? i guess ill try to figure it out lol
I made a little picture thing in paint to assist in my describing, lol. See it below.
Here's what I did and it hasn't fallen off yet!
Start at bolt #1, go to #8, back to #2, then to #7, down to #4, back to #9, then #5, #10, #3 then finally #6.
Torque them to 44inch pounds the first pass, then do 89 inch pounds on the second pass. If you don't have a torque wrench....estimate.
Hope this helps...
Attachment 579
Tanner---WTF??? Are you 4 years old? Nice picture douche. And could you make it any more complicated???? Its a simple X pattern.
But still...thanks for giving him step-by step instructions...even though I drew a better picture when I was 3 years old...
lol no offense on the drawing but couldnt you put the 2 where the eight is and so on.. instead of saying number 8 goes second and 6 goes third lol. thanks man it helps alot!
idk, i just woke up and started making it in paint.
oh well, unappreciative bastard tyler...lol
Man - shake that Etch-A-Sketch up and start over...lol
Whatchya runnin - Etch-A-Sketch 2.0? :lol:
(Tanner firing up his "computer"):
http://luscher.org/art11/2006.10.13_...etch_crash.jpg
...and grabbing his "stylus" for those tedious drawings:
http://www.focusmerchandising.com/im...tchasketch.jpg
:lol:
Moze you nerd
thats F N FUNNY
Here you go, Once all 10 intake manifold bolts are hand threaded as far as they'll go, tighten them down with a wrench and then torque in the order shown in the picture on the below. You need to torque these down in a 2-pass fashion..the first pass, tighten to 44 INCH-lbs, then, on the 2nd pass torque them to 89 INCH-lbs. Again, note those specs are in INCH lbs.
Sorry Munson, when I posted this your picture wasn't coming up but now it is. Your sequence is a little different than the one I posted but will work.
By the time of your post, it says you woke up at 2:26 PM. My God man, WTF are you doing sleeping so late for? Don't you go to school? Or have to report to your probabtion officer at 9 a.m.?Quote:
Originally Posted by MunsonAuto