Sounds like bad o2 sensors or bad, missing or broken grounds. How does it do a wot? If good then its likely the sensors.
Printable View
Sounds like bad o2 sensors or bad, missing or broken grounds. How does it do a wot? If good then its likely the sensors.
Sounds like bad o2 sensors or bad, missing or broken grounds. How does it do a wot? If good then its likely the sensors.
in park or neutral didnt quite go to WOT cuz we got it up between 5 and 6 grand on the tach with no issues.. its when its under load (in gear) that it does that.
i want to put a wideband on it
thoughts on this one?
http://cgi.ebay.com/ebaymotors/AEM-G...Q5fAccessories
http://cgi.ebay.com/ebaymotors/Innov...Q5fAccessories
exact kit I have, I'd recommend that, because it'll be easier for me to install lol
Reason I picked it, was because it's compatible with all the tuning software I was looking at, I'm not 100% on AEM, they seem to be more for import market.
gotcha
let me make you squirm
look at this one
http://cgi.ebay.com/ebaymotors/Power...Q5fAccessories
also im either gonna have to have my rear o2s deleted from the tune or have a new bung welded in for the wideband. right?
you want to have a bung welded in, this MUST go infront of the cats
also on that wide band you posted ive heard alot of people say they prefer a digital readout w/ an analog as well (like the aem or autometers) because just digital can be hard to read at times
When I put mine in, Nelson said he's had them before cat, after cat, 12 inches away from the tailpipe on vehicles with/without cats, and reading was withing .1 of all of them. You semi calibrate the sensor for where it is located, so it doesn't really matter.
Mine is post-factory-cat, and my values correlate with factory narrow bands pretty well. Not saying that won't be BETTER, but it'll definitely work for now.
talked to Erica.. she said she'd have alan call me or she would later today.
My LC-1 is very difficult to read when it's jumping around everywhere... as in from the time I mash the gas, grab the button, hit the button, get it settled in... It's rough. I'd get one with an analog readout as well if I do it over.