-
Ya well I'm sure we can work somethin out. I'm excited bout it so lmk when we can meet if we decide to do so after I check out the pics.
-
I went out and took a video with my phone, it is 5 megapixels, but idk how it turned out. Im working on uploading it now.
I found my video camera and charger, so if the phone doesnt work, I will use that.
I also took a 2nd video of it idling, then rev up, then it coming down and dying (when releasing the throttle).
-
Ok, so I got the videos uploaded. The sound is a little jacked up when the phone is too close to the manifold, but I think it will do. If you wish, I can charge and use my video camera, which worked fine at the drag strip, no distortion on the sound. Instead of taking pictures I just did a walk-around with the video, but if you want still shots, I can do that too.
http://i34.photobucket.com/albums/d1...h_SNC00081.jpg
http://i34.photobucket.com/albums/d1...h_SNC00082.jpg
-
Wow you werent a kiddin bout havin a buttload of stuff on the inside and bed of the truck lol. Some of the underhood and undercarraige shots were a little distorted probably from the mix of bright sunlight and dark areas. If you could grab some better shots of those with either your vid cam or a better still shot cam that would be awesome.
Was the y-pipe installed in that vid? It looked like it was open manifold or somethin but I couldnt tell.
Do you plan on doing anything to it before I get it?
Fixin the fuel tank strap?
Is there a reason why the front grill, etc. are off?
Do you have the matching wheel and tire for the front drivers side?
Good luck at the track!
-
y pipe not installed, need to weld in the cat replacement pipes, will do that before delivery. the manifold side of the y-pipe is bolted to the manifolds for o2 sensors, I just need to weld in 2x 12" pieces of pipe in place of the cats.
front grill removed to install aux factory trans cooler, PS cooler
I do have the matching wheel, tire had a leak.
I will take care of stuff as I have time. I will see about getting the fuel gauge to work again (like I said, I think it is a ground), and I will attempt to fix the strap. If not, I will have a replacement to go with the truck.
i will get true pics and a true video when i get home tonight.
-
here is the link to the new pictures and the new videos. the ecu seems to be learning, as it didnt die this time after revving.
http://s34.photobucket.com/albums/d1...20and%20video/
-
photobucket isnt wanting to upload my new 135mb video, so i am uploading it to youtube
HERE is the youtube link
the audio still broke up a little bit, but not horrible
-
looks good. that vid is MUCH better. Thnks
-
oh, i forgot, pay no attention to the wires underneath the driver's dash, those are for the tach and water temp gauge up on the dash lol, those arent dash wires :D
-
GRRRR, i hate technology. I took way more than 18 pictures, but for some reason they didnt get transferred to my computer. I will get them put up now
