LPP vs Pacesetter

Printable View

Show 40 post(s) from this thread on one page

02-02-2009, 10:15 AM
timber74wolf

Quote:

Originally Posted by YenkoST

Others on performancetrucks.net seem to think so. I don't really know....I am going to install cats into the y-pipe with the Corsa exhaust but....I don't know to be honest.

Let us know how they work out. I am really interested in a set, but I want to know how they perform vs the 3 inch diameter. After all this is my daily driven vehicle.
02-06-2009, 06:39 PM
mnc2fan

Same stainless that stainless works uses, well actually a little better. LPP uses 321, stainless works uses 304. Apparently 321 can hold a weld better, since those look like they have a welded spot that would be a good thing.. obviously.

Would be really awesome if they were the quality of the pacesetters. Can't wait to hear, those are more than likely what I'll get. :hyper2:
02-07-2009, 02:52 AM
Sport91

meh no love for the 2500hd with 6.0l :(
02-07-2009, 08:50 AM
ecmoney

stainless is how perf, headers should be made. I couldnt think of any reason not buy these.
02-07-2009, 01:37 PM
Robt34

Quote:

Originally Posted by YenkoST

Just bought mine today...I'll let y'all know how these fit on a 2007 Classic crew cab.

Only thing I'll change is the 3" y-pipe to a 2.5" pipe for more velocity.

Did you get these bolted on yet? Got any pics?
02-07-2009, 05:05 PM
GMCtrk

Quote:

Originally Posted by mnc2fan

Same stainless that stainless works uses, well actually a little better. LPP uses 321, stainless works uses 304. Apparently 321 can hold a weld better, since those look like they have a welded spot that would be a good thing.. obviously.

Would be really awesome if they were the quality of the pacesetters. Can't wait to hear, those are more than likely what I'll get. :hyper2:

Not to be an ass, but the quality of the Pacesetters is nothing to write home about. I've used OBX, Paces, and Dynatech. These LPP's should be significantly better quality than the Paces.
02-07-2009, 09:19 PM
YenkoST

Quote:

Originally Posted by Robt34

Did you get these bolted on yet? Got any pics?

Hope to install on Monday or the following weekend.
02-07-2009, 10:06 PM
Assman

I'm going to order these next friday, they should work nice in my 4x4 1500 6.0 swap. :) They look much nicer than pacesetters for only a couple dollars more.
02-10-2009, 01:43 PM
YenkoST

I should have pictures of these tonight laid out...so I'll post some up.
02-10-2009, 03:32 PM
chevytech777

how is the heat coming off of them - no problems of melting wires/plug wires ??????

Show 40 post(s) from this thread on one page