Not bashing it (Im not a pro on cam profiles) I just made a few bad choices when I did my first build and waisted time and money.Good luck on the build Love the OBS trucks.they are a great foundation to build on Pat G or Brian Tooley are smart dudes
Not bashing it (Im not a pro on cam profiles) I just made a few bad choices when I did my first build and waisted time and money.Good luck on the build Love the OBS trucks.they are a great foundation to build on Pat G or Brian Tooley are smart dudes
Thanks man!Quote:
Originally Posted by fabunlimited
I had a LS guy that I trust design it for me but I'm no cam expert either so was just seeing what some other knowledgeable cam guys thought. I was told that cam profile should get the DCR where it needs to be without me needing to mill the heads.
Buying the last bit of parts for the swap today. Also mailing out my harness today to Standalone Solutions and the computer to Nelson Performance. Once I get those back we'll get the swap underway! I'm getting pretty excited!
What clutch and flywheel are ya gonna use?
Flywheel is a sachs 1050. Didn't plan on buying a new clutch because I'm swapping in a nv4500 as soon as I find a good used one. Are the clutches for a nv3500 and nv4500 interchangeable?Quote:
Originally Posted by chvy=power
You have to run a LS 4.8 clutch with the 1050 flywheel....the older ones won't fit and the bolt holes are different. I ran the RAM 1550 flywheel and it will run the LS clutch or the sbc clutch. And I'm not sure if the 3500 and 4500 use the same clutch but I don't see why they would be different..
Damn, thanks! You don't happen to have a part number for the LS 4.8 clutch do you?
You the man. That's the one I was seeing but was hoping there was a cheaper one lol
advance auto sells it for $295 http://shop.advanceautoparts.com/p/p...-1a/19770251-P