Deal for somebody near houston...

Quote:

---

Originally Posted by 408.Luke

its like 4 or 6in to narrow, i dont remember exactly. and im not sure it will bolt right up either

---

wow thats a lot too narrow...

So, is it narrower hub to hub or what? Would something like this work for me instead of having to section 6" out of my rear-end. I've already said too much.

Quote:

---

Originally Posted by 408.Luke

you would have to cut all the brackets off of it and weld F-body brackets on, and that would only work if this rear end was the right width, if it was a little narrow it would be ok cus you could run a bigger off set wheel (and have a nice lip) but for the nbs trucks they are like 6in to narrow or something like that

---

Sounds just like building a 12 bolt to me. How hard would it be to change it to fit the 5 bolt wheels?

Quote:

---

Originally Posted by ss454327

Sounds just like building a 12 bolt to me. How hard would it be to change it to fit the 5 bolt wheels?

---

new axles from moser with a 5 lug pattern. or redrill the stock axles

If moser makes 9.5" axles now, let me know because I tried to get them to build me some and they don't do it because they don't have the forgings to make new ones.

Quote:

---

Originally Posted by RedHeartbeat

If moser makes 9.5" axles now, let me know because I tried to get them to build me some and they don't do it because they don't have the forgings to make new ones.

---

didnt know that! damn im glad im not running one, cant get a spool, cant get axles, and one thats the right width is like 1200$ Now if moser would stop being queers and send the right width 9'' i could get the truck done :argg:

with the correct offset wheels a person could use the OBS 9.5" rear end in a NBS truck. No need for spacers if you order the correct wheel offset.

any way you could measure the housing for me? Need a rear for the camaro...