Can anyone help me out!

Quote:

---

Originally Posted by Three6GMC

the 224 is a pretty standard cam down here in the valley alot of people are running it with a 3200 stall with gears and get some good results out of it.........

---

thats what i was hoping to here! that will prolly be my setup as soon as i get back to tx

Quote:

---

Originally Posted by arkansashunter08

I have a 06 rcsb silverado with a 5.3. Its fully bolt on from PRC heads on down except for camshaft and stall. Would TR224/224 be the best cam for mid to high range? Any suggestions for a better cam? Plus in thinking about going with a PTC stall.

---

more cam will also kill of dynamic compression, unless you advance it more...
5.3 could be bad *** if they was 10:1, and had 243 heads...
you's see tons of 350-400 rwhp 5.3 around

with a 230 deg cam you might need a 4000 stall to keep the revs up, cause your gonna not have any mid range or low end...