that's opinion. you can do drop spindles or springs. or be a cheapy like me and cut your stock springs. springs will start to sag after some time. i would go with spindles myselfQuote:
Originally Posted by timothy_james07
Printable View
that's opinion. you can do drop spindles or springs. or be a cheapy like me and cut your stock springs. springs will start to sag after some time. i would go with spindles myselfQuote:
Originally Posted by timothy_james07
did you just cut one coil off each side? i have an extra set i might play around with
i cut about 3/4s of a coil off. i would say it dropped it about an 1"Quote:
Originally Posted by timothy_james07
Timothy James07 There should be no problem gettin them to fit.
The guy I got them from had them on 305/45/22 he only sold them cuz he went 26's
I'm not too worried about the back. Just want to make sure I can get the front to tuck without any problems
I have a 2/4 drop with the stock 20's, and they fit no problem
still have these?