Is this where the cool kids hang out?

He is the one who purchased my old motor. Very nice guy. The power plant he purchased from me produced 274 rwhp. I hope you enjoy the site. It is addictive and you must be warned. I lost count a year ago a just how much i have spent on my truck.

Welcome.

welcome to the site!!!

Quote:

---

Originally Posted by molitor

And if i had not been digging and searching for the past 3 years like a coke fiend on shag carpet,

---

Welcome. That is the best thing I have read in a while. Took me a bit to get a mental picture of that.
Hope you got a spending limit on your credit cards. Youll end up maxing them out playing on here too much. Gets fun after well... the first thing you do.

Welcome from one of the cool kids! lol

Quote:

---

Originally Posted by Warlock2007

You said your selling some stuff. What you planning on selling?

---

all sorts of goodies man, i have 2 sets of oem 1.7 ratio rockers, 1 set of 1.75 ratio rockers that i got from a guy who ran them without assmebly lube. little scratched in the cups, i'm gonna take a swing at polishing them out. i have two sets of oem pushrods, which, unless you really want these, they're useless if you put in a cam, they bend like a twizzler. i have a used front cover with a newish (67k miles) crank seal. 2 oem LS1 cams. (1725) suffix, this is the cam for a 5.7l ls1. and i have a nasty loper that i bought from another member. 220 degree\ .590ish lift cam. need some major valve springs.
and some used but not too severely used lifters. for the most part, i've bought alot of grab bag type deals to get specific parts. and i have alot of stuff left over. oh yeah! the two LS1 cams. . . Brand new, never even installed.

Welcome. Don't be like me. I had a full ride engineering scholarship and crapped out. Stay the course and be helped more than you help....LOL.

Quote:

---

Originally Posted by molitor

all sorts of goodies man, i have 2 sets of oem 1.7 ratio rockers, 1 set of 1.75 ratio rockers that i got from a guy who ran them without assmebly lube. little scratched in the cups, i'm gonna take a swing at polishing them out. i have two sets of oem pushrods, which, unless you really want these, they're useless if you put in a cam, they bend like a twizzler. i have a used front cover with a newish (67k miles) crank seal. 2 oem LS1 cams. (1725) suffix, this is the cam for a 5.7l ls1. and i have a nasty loper that i bought from another member. 220 degree\ .590ish lift cam. need some major valve springs.
and some used but not too severely used lifters. for the most part, i've bought alot of grab bag type deals to get specific parts. and i have alot of stuff left over. oh yeah! the two LS1 cams. . . Brand new, never even installed.

---

PM Sent.

Welcome. I am not cool. :D

Give me more specs on the 220 cam...

^^ at least you realize it Tyler!

welcome to the site!