it is all up to you my slick does not move. i run them tubeless with no screws and i 60 foot 1.52 is my best.
Printable View
it is all up to you my slick does not move. i run them tubeless with no screws and i 60 foot 1.52 is my best.
Imma run it before I put the screws in it to see if it moves any like you said. I doubt it will. I am always into doing things safely though. I doubt my 60ft will get that low! haha. But O I am going to try.
yea that is in my car but if you can get your truck to 60 what my car does that would be sick.
I want it to be sick. I want to be down right ILL. HAHA. all things in time though. For right now get them on and find out how jacked up my pinion angle is.
Truck is a lot heavier and has more potential to spin the bead. If you're not gonna run the tube you should run, don't bother with the rim screws.....but if you don't run a tube, get REAL screw in valve stems AT LEAST. If you run the proper tubes (natural rubber tubes), use the screws.