Trucks Running Badass!

Quote:

---

Originally Posted by 1slow01z71

You cant deny his truck is more responsive at part throttle inputs and lower rpms then your truck is if I reemmber right you have a mid 230s cam. I bet with that cam it gives you some massive top end, and on the bottle I bet it comes out of the hole damn good. But as far as Daniel told me nitrous isnt in the near future and he wanted a good driving truck with no quirks and the larger cams you start getting driveability problems but of course everyones definition of driveability is different. I ran 237/242 cam with a 4K stall in my Z for a few thousand miles.:laugh:

---

Most definately agree....he for some reason mods to mods before our cams ran way better times on motor....my cam is a 233/238...but yes i called Texas Speed and told them my setup and what size shot i was running and this is the cam they custom grinded for me....i see the point you are making...with the smaller cam and the 3000 stall he will prob get him a real low 1.8 to high 1.7 60' and get him into the low 13's maybe even high 12's.....there's no doubt he will walk me on motor to motor...my last time out with the new cam and some problems i went 8.9 but picked up 3mph and kept the same 60' with a 1.95....but i would still love to run him in the 1/4 to see if i fetch him on the big end

I just wanna see you guys run motor to motor---just for the sport of it. Two 03 Red cammed SSS... Sweet little match up! But yes, both trucks will act quite differently based upon the cams that you guys have gone with...Daniel's will react quicker off the line, but Virgil's will hopefully have enough grunt up top to even out at the end of the 1/4...

Sounds exciting! Is ennis open for test and tune in like a month or so?

Quote:

---

Originally Posted by Red03SilSS

Sounds exciting! Is ennis open for test and tune in like a month or so?

---

they have been open already...just let me know when you are gonna come up

I may have to play a little too with you guys, I dynoed it this weekend 750Ft-lbs of tq ought to do somethin :D

Damn Cody...your truck does move really well for being such a heavy pig running on those big ass tires... I am really wanting to see what kind of track numbers you will run...

Ill throw the stockers back on for those guys and load up another tune Ive been wanting to try thats got a little more go juice to it:devil:

Quote:

---

Originally Posted by 1slow01z71

Ill throw the stockers back on for those guys and load up another tune Ive been wanting to try thats got a little more go juice to it:devil:

---

bring it on....hope you don't spin to much...but damn that's a lot of torque

Quote:

---

Originally Posted by mean05

bring it on....hope you don't spin to much...but damn that's a lot of torque

---

Honestly, I dont have anything for you guys right now, the real tune I have to load would limp my tranny before I got out of first gear. In 4hi the truck doesnt spin much because of all the weight over the front end, it chirps all four with the tow tune, my other semi-tranny safe tune should spin just a little. The tune that I have ready to load up in another truck ran 13.7@97 on 33s. After I get the built trans in this summer Ill come to play for real.

Quote:

---

Originally Posted by 1slow01z71

Honestly, I dont have anything for you guys right now, the real tune I have to load would limp my tranny before I got out of first gear. In 4hi the truck doesnt spin much because of all the weight over the front end, it chirps all four with the tow tune, my other semi-tranny safe tune should spin just a little. The tune that I have ready to load up in another truck ran 13.7@97 on 33s. After I get the built trans in this summer Ill come to play for real.

---

good deal...i will be ready...my new motor is getting built this spring...time for a bigger shot :D

what are you doing to the trans?