Mounted my tach

Quote:

---

Originally Posted by dared2k

that is exactly where i HAD mine. It looks great and doesnt really block you view. Here is the problem! Over time the truck vibration will weaken the plastic in dash. Mine broke off leaving a quarter size hole in my dash. The chuck of dash that broke off was still attached to the tach. I had the same tach as you. Unless you beef up the mounting point i am affraid you will shed the same fait that my dash did. thats just my 2 cents and story. Good luck! red2k

---

Its braced under the mount and its thru the dash and the brace underneath.I almost drilled without locating the brace....and it would have broke out..thanks for the heads up

Quote:

---

Originally Posted by COWL327

I took the airbag switch out and pushed it into the cavity,then I glued a plastic sheet to the back of the dash cover.Drilled a hole and removed the suction cup and epoxied a bolt to it then bolted to the plastic sheet.and it works great there

---

Nice! That looks simple enough.

great, at least you didnt bone head it like i did.

Quote:

---

Originally Posted by dared2k

great, at least you didnt bone head it like i did.

---

OH...Ive done my share of that...trust me! :tvhaha:

For some odd reason, I honestly believe Dale... :LOL:

Here it is with the blue LEDhttp://www.ls1truck.com/upload/files/42/P1010216.JPG

are you really revving your engine to 6700 rpm?

NO...key on not running