Drive shaft yoke

Measurements are important. Find out from the shop doing the work how they want you to measure the shaft so you get the correct length.

Quote:

---

Originally Posted by Quik

for my setup. i didnt need to shorten the shaft at all. a stock auto shaft worked fine for mysetup. only thing i had to do change was the rear Ujoint to mate with my 14bolt

then once i got the viper t56 i had to change the front yoke but stock lenght

---

huh no kidding that would be a nice treat... i gota get a turbo 350 yoke and try it out hopefully it will be fine if not i guess its no big deal

You need a turbo 400 yoke . I think that the 350 is too small.Some people got away without shortening the drive shaft most don't . I had to shorten mine.I had a whole stronger one made .:)

Ron

Quote:

---

Originally Posted by rerick

You need a turbo 400 yoke . I think that the 350 is too small.Some people got away without shortening the drive shaft most don't . I had to shorten mine.I had a whole stronger one made .:)

Ron

---

lol this thread is starting to confuse me is it the 350 or 400 lol....