Printable View
i saw some post about problems with e-fans and the wiring should i expect the same, and will pcm need to be worked on so they could work with the wiring harness?
and i also have an 2003 dash cluster i guess thats what its called, well the thing with all the guages well it goes up to 120 and mine is 2001 only goes to 100, can i swap them out easily or should i not even try i'm pretty sure i seen acouple of older truck with that setup. :help:
well with my fans, i have a nelson tune and should already be programed in...
same kind of deal with the new cluster, you have to get it calibrated/programed to work with your truck
When I had my '01 Silv, I sent off for the dash and they programmed the mileage into it. They now send a sticker that you are supoposed to put somewhere so other know that your mileage may not be correct.
To run a Nelson harnesss or another harness that uses the PCM pin you will have to have the pin programmed . Some people do not like to hear the fans on high when the A/C compressor turns on. I did not hear it that much nor did I care when I had the '01 Silvy.
do yall know if the pcm pins can be programed by hp tune and also the guages, i think i know somebody to
do the gauges to set the milage but if i just swap them out right now will they work or even connect.
Last I looked the '03 cluster won't fit the '02 down trucks.