Neutral Safety Switch Bypass

I am using an automatic truck harness in my manual truck and the neutral safety switch has been giving me problems and now I cant start my truck with the key. I tried hooking up the ignition positive voltage to the starter relay feed with no luck. However when the key is on and I tap the IGN wire to the yellow park/neutral output, the starter cranks but I can't leave it wired that way because the starter won't disengage. Does anybody have any experience with this or any ideas on how to get rid of the Neutral Safety Function completely? Thanks

seems like i answered something similar to this not too long ago.

simply find the two wires in the PRDL switch and connect them together.
this will bypass the switch.