Kenne Bell 2.8h supercharger kit COMPLEAT, 8 rib, Killer Chiller, headers

I'm going back turbo and selling my blowers setup. I'm selling EVERYTHING that is needed to instail this. All the little stuff I had to buy to put it on my truck.

Its a Kenne Bell 2.8h big bore intercooled supercharger. Approx 25k miles. No know issues, just got back from a 3k mile road trip in 5 days had no issues with any part of it. Here's what you get...



2.8h liter (1 bar, high boost design case) Compressor

Heat exchanger and all hoses, pump, Killer Chiller (uses trucks AC to cool the intercooler water to lower IAT's)

8 rib drive setup with IW 8" over drive crank pulley, 8 rib PS, Alt, and Magnuson HD tensioner.

8 rib 3.25", 3.65" pulley's and 3.75" 4" 6 rib pulleys (the 3.65" pulley makes 15psi on my 5.7 LS1)

All the fuel lines and fuel regulator for return fuel system with connections to just plug right into stock fuel lines.

60lbs/hr injectors and fuel rails.

Edelbrock 90mm throttle body and 4" air tube and filter for it.

Pace Setter headers.

There is probable some little stuff I am for getting about but you'll get everything I take off the truck.

I'm selling this as a COMPLETE kit and not wanting to part anything out unless someone just wants to buy the blower and then I'll sell the other stuff.

$4995.95 for the COMPLETE Kit

$3995.95 for just the blower and 6 rib drive

http://i3.photobucket.com/albums/y57...6/photo-39.jpghttp://i3.photobucket.com/albums/y57...6/photo-84.jpg
http://i3.photobucket.com/albums/y57...6/photo-78.jpghttp://i3.photobucket.com/albums/y57...6/photo-83.jpg
http://i3.photobucket.com/albums/y57...6/photo-82.jpghttp://i3.photobucket.com/albums/y57...6/photo-63.png

Also has provisions for meth both below the blower at the discharge and into the mouth of the blower

http://i3.photobucket.com/albums/y57...6/photo-52.jpghttp://i3.photobucket.com/albums/y57...6/photo-49.jpg

Also replaced the IAT with one that protrudes out into the tub

http://i3.photobucket.com/albums/y57...6/photo-47.jpg

Let me know if you have any questions or any offers. :) Thanks!

This just made me wet!
OMG..
well, i know you wanna change.. ill just pray to the speed gods you have this when im ready to buy something.. i love that damned thing!!!!!

i would love to buy the 8 rib setup from you if you decide you want to seperate anything. what size is the SC pulley?

Quote:

---

Originally Posted by 567234ta

i would love to buy the 8 rib setup from you if you decide you want to seperate anything. what size is the SC pulley?

---

It's still on the truck and not selling anything or coming off till someone buys at least the blower. The 8 rib setup will most likely go with the blower. Can't imagine someone not wanting it. :) I've got 3.25" and 3.65" 8 rib pulleys and 3.75" and 4" 6 rib pulleys.

Lower PRICE! :D $4995.95 :D

Quote:

---

Originally Posted by kbracing96

Lower PRICE! :D $4995.95 :D

---

yer killin me here!

Quote:

---

Originally Posted by kbracing96

It's still on the truck and not selling anything or coming off till someone buys at least the blower. The 8 rib setup will most likely go with the blower. Can't imagine someone not wanting it. :) I've got 3.25" and 3.65" 8 rib pulleys and 3.75" and 4" 6 rib pulleys.

---

Yeah i need the pulleys, i have the same setup im using a 3.25" also but it's only 6 rib.

Offers?? ;)

Bump...Offers??? :)

Quote:

---

Originally Posted by kbracing96

Bump...Offers??? :)

---

ill trade you for a 112 kit! :D