Printable View
This lift plate has several hook locations making pulling your engine easier and safer.
6 bolts hold this plate against your valley cover plate. Plate is Steel. We can build more if needed.
50.00 + freight + fees.
Pm or call me if you have any questions.
940-781-5204
Attachment 3504
So do use longer bolts to make sure you have enough threads in the block. In past always take the valley cover off and then bolt the plate down.
No the stock ones are fine. With 6 bolts there is plenty of holding force, I do recommend you tighten them so there is no slop in them.
Here's a pic of the plate I use.
The stock one engage deeper then the ones I had used in the 2nd pic.
Attachment 3506
Threads already started 1 full turn. Still plenty to go. :)
Attachment 3505
That good to know. Sorry i have one already. I wish i would have thought of that when i did my motor swap. Good info.
THanks