Need some help. I would like to keep my cruise control thats in the truck. How can I run it through the factory switch on the column or can I? The engine is out of a 08.
Printable View
Need some help. I would like to keep my cruise control thats in the truck. How can I run it through the factory switch on the column or can I? The engine is out of a 08.
Are you going with a drive by wire or drive by cable throttle body?
lowchevytrucks, The engine is dbw
i new the engine was but didnt know if you swapped tb's. I dont know how to answer your question but i'm doing the same thing and was told there's only 2or three wires to hook up to the throttle body. let me do some thread reading.
This is for a different year donor and recipient but it might be the same or close to it.
http://www.ls1truck.com/forums/lsx-t...-diagrams.html
Check post #5
this is going to be quite a bit different from a '93 because the cruise controls on these older trucks ran of vacuum..........
Still doing some thread reading......
why not upgrade to the electronic box?
If you have the electronic throttle pedal then wiring up the cruise will be nothing more than wiring the stock cruise button into the PCM properly. If you have a throttle cable then you can wire in an electronic style cruise box from a later model.