so i put the djm lower control arms on(4''), well it seems like it isnt lowered all the way, there isnt a way to adjust them is there? to lower the front any more? or maybe it didnt do exactly correct? any help would be great thanks
Printable View
so i put the djm lower control arms on(4''), well it seems like it isnt lowered all the way, there isnt a way to adjust them is there? to lower the front any more? or maybe it didnt do exactly correct? any help would be great thanks
got any pictures of before and after? I have used the 4" and now im running 3" and I noticed a difference pretty immediately
are you sure the springs are seated in the spring buckets all the way?
mine went lower than expected...im thinkin of actually of going back up a tad, just cause our roads suck here
ya something doesnt wound right? have you checked if everything seated correctly?
+1 If the spring is not fully seated in the spring pocket, it will not be as low as it should beQuote:
Originally Posted by banker099
heres a before and after, lmk if this looks 4'' to yall
before
[IMG]http://i291.photobucket.com/albums/l...tachment-3.jpg[/IMG]
after
[IMG]http://i291.photobucket.com/albums/l...tachment-4.jpg[/IMG]
would the sway bar end links have anything to do with it? the springs look to be seated right
You really should do you photos in the same location. One place you're on level ground and the other looks like you have the left front compressed on a hill or something. Doesn't look like a flat 4" drop, though.
here is my 4" in the front with the DJm for comparison. You might be running a tad taller tire then me though
http://i39.photobucket.com/albums/e1.../DSC012761.jpg