On the 05 electric fans..do you have to buy them piece by piece or is there a part number jus to buy the whole assembly...I have all the part number from previous posts jus wondered...hoping to do the fans next...
Printable View
On the 05 electric fans..do you have to buy them piece by piece or is there a part number jus to buy the whole assembly...I have all the part number from previous posts jus wondered...hoping to do the fans next...
i think you still have to order them in pieces :tantrum:remember they are designed for a 34" rad to.
Yea, I have the 34 inch radiator...jus wasnt sure it I could get it as one unit or pieces..thanx
Will these fans work on a 01 truck and be able to be controlled by the pcm? I don't know if I have a 34" rad but I think I don't.
no leo you dont. you have a 28"
Could I fit a 34" radiator where my stock one is at? How much are they and where can I get one?
i work at a chevrolet dealer and just did this conversion. all the fan parts must be purchased piece by piece at this time.the list price for the motors is $55.00,blades are $32.65 each,shroud $61.80.I used terminal 42 at pcm connector c1.used ls1 edit to set the turn on temp at 160 deg.factory temp is set at 288 and the fan option is turned off.on the 05 p/u circut 33 at pcm connector c2 is the high speed turn on circut.on my 01 suburban circut 33 moniters the recirc request from the ac control head.i will probably hook the high speed to the ac compressor relay control
circut for now.i am going to call delpi to see if there is another unused circur that will opperate the high speed control.