All insite wanted! PLEASE READ!

Ok so I have paid for the cam for my truck so dont try to tell me to change my mind. (I recieved an excellent deal I couldnt pass up) cam in sig. Now that it will be installed shortly im wondering if for the time being while I dont have a converter are my E.T's going to drop because of the cam being so big? Now converter choice. I spoke with chris from Circle D and I know he really knows his stuff but I just want oppinions. He said that a 3600 would be good and I completely agree, that is the # i've had in my head when i first thought about the cam. Now for the problem, I am going to be going to college in the fall so I cant spend $800 on a converter. So I have 2 options, I can buy a reworked TB or should I just wait and hope to stumble across and find a decent used higher stall?

Sorry for such a long post. All oppionions wanted and appreciated!

Future mods:224/228 581/588 112lsa, comp springs and pushrods! Go big or go home!


maybe a tab big, but depends on what more youre gonna do besides a stall? the 3600 would be nice pending on the STR? what about the tranny? you think the servo is gonna keep it together? you have ported heads in mind? that cam is gonna need to breathe alittle bit, i personally would waite until you can afford the mods you want!! you'll thank yourself in the end!! good luck and hope it all comes together for you :)

its not too HUGE, and with your 4.10s i say youll be ok for a while, it might be a little slower, or the same, or it could be faster, who knows, but i say just go for it and save up for the right stall

Oh I forgot to mention earlier that a shift kit will be installed soon also, I know it's not a built tranny but every little bit helps, right?
And to answer your ? I do plan on taking this 4.8 to it extreme with heads, intake, ETC... and no F.I in the future, just N2O

It is in fact huge mounted in a 4.8 ECSB. 3600 or don't put the cam in IMO.

IMO I would try it and see how it feels. I had a bigger/choppy cam in my 4.8 ecsb and it ran great. sounded nice. bolt ons stock heads, and stock stall, Was good enough to trap 97mph in the 1/4 with 4850 weight. But you will need a decent stall. If your ever going to tow, dont go any higher than a 3200. You could find a tight 3500 and be ok. But The bad thing with these 4.8's is they are better suited to either boost, or rev really high. So I say if your going to stay NA, get that cam and some ported heads that have a smaller cc, and put down 350-375whp at 6500rpms. With a decent stall you should see mid 13's with that cam and some headers. Keep the gears, youll need them. Also smaller tires are your friend.

Thanx guys, what I think im gonna do is wait til my b-day in august and save up some and do it right and get a new Circle D.

Quote:

---

Originally Posted by 06 4.8

Thanx guys, what I think im gonna do is wait til my b-day in august and save up some and do it right and get a new Circle D.

---

Good decision do it right the first time.

Doing it right the first time usually saves you a ton of money and time..

Quote:

---

Originally Posted by 06 4.8

Thanx guys, what I think im gonna do is wait til my b-day in august and save up some and do it right and get a new Circle D.

---

go with a tcs converter i know a rep and you could get it way cheaper than a circle D. Tcs is a better converter imo