5.3l with harness

I bought this motor off of a member here(tdk08) and planned on using it in my 80 silvy but have decided to do a big block in it. I tore the top half off of the motor to check it all out and it looks fairly clean for a 125k mi. engine. exhaust manifold bolt snapped off in head, needs all gaskets $350 firm. I don't mind seperating motor and harness if I can get the motor gone first. 250 for motor only.

http://i570.photobucket.com/albums/s...p/P5200064.jpg

http://i570.photobucket.com/albums/s...p/P5200066.jpg

http://i570.photobucket.com/albums/s...p/P5200067.jpg

http://i570.photobucket.com/albums/s...p/P5200068.jpg

http://i570.photobucket.com/albums/s...p/P5200069.jpg

http://i570.photobucket.com/albums/s...p/P5200076.jpg

http://i570.photobucket.com/albums/s...p/P5200077.jpg

http://i570.photobucket.com/albums/s...p/P5200078.jpg

http://i570.photobucket.com/albums/s...p/P5200079.jpg

http://i570.photobucket.com/albums/s...p/P5200080.jpg

http://i570.photobucket.com/albums/s...p/P5200070.jpg

http://i570.photobucket.com/albums/s...p/P5200071.jpg

http://i570.photobucket.com/albums/s...p/P5200073.jpg

Sell the harness seperate?

wow...350 is cheap!...

good deal to be had here

What year is the engine and harness?

the harness is out of an 01 2500hd, the engine is from a 99 Z71. I will sell the harness seperate if I can sell the motor first. I would be willing to go 100 on just the harness and 250 for just the motor. I have $350 in the motor and harness not including the gas and time used to go pick it up so my prices are firm. Thanks for the interest guys, I will try my best to get pics up later today.

so that means that harness is for an 80e?....been down that road before...

Quote:

---

Originally Posted by banker099

so that means that harness is for an 80e?....been down that road before...

---

take it that makes it a PITA to mate with a 60e?

yeah not enough wires in a 80 harness to make a 60 work :(

but if you are planning the 80e swap it would be perfect.... the trans pigtail is missing anyway so you could always wire in the 60e pigtail and run the wire to where it needs to be fairly easy with the harness on a bench though.