Checklist

Ok here is what I have sitting at my house.
CAM SWAP
----New camshaft
----New valve springs, locks, retainers
----New 7.4 hi-tech pushrods
----New mail order tune from Allen ( Havent ordered yet )
----Efans( Havent ordered yet )
DRIVETRAIN
----New 4.11 gears and install kit
----Auburn Limited slip (will have soon)
----New corvette and billet servo's
----Home made traction bars ( after install )
----15x10'' wheels for slicks

What else do I NEED? I know some suggest a new timing chain, and oil pump. But do I have to have them? Also will a Ls1 underdrive crank pully work? Thanx guys.

Oil and rear end fluid.

Oil pump and timing chain with gears will add a lot of install time.

depends on milage, if u dont do the timing chain and such you dont have to unbolt the oil pan which is nice. Also get a spring compressor and the tool for the sparkplugs to hold up the valves with an aircompressor came in handy.

ooo and a second pair of hands makes a big difference.

also a bunch of 8mm and 10mm long and short sockets, wrenchs, ect. and a 3/8 deep well sockets if you replace the valve seals, to seat them. i forgot that part in my swap.

Just a F Y I sears has there 154 mechanic tool set reg 189 on sale 99.99, club members get it for 89.99 and a instant 50.00 gift card. If you need more tools:tacos:

Good call.

I've bought stuff like that on sale at Sears then resold it for almost regular price on eBay. Not sure if that's legal though.