-
Anyone have any? I am gonna plug in some mods but would like to start with stock. Unfortunately it looks like the DD software doesn't have these engines and I don't know a lot of these stock specs.
I had to pick the SB 305 and then tweak the bore and stroke. No clue on the rest of this. Don't know any of the stock cam specs either; I would like to at least verify the stock numbers to make sure I am starting from the same point.
Thanks,
Andrew
http://home.nycap.rr.com/agreif/Truck/DD.jpg
-
i have my heads/cam LS1 file in Dyno 2003. i use it to tinker with what cam to get with stage 2 heads.
-
OK, I got the baseline to look ok, but it's using a generic cam and just a shot in the dark for flow.
Firts one is using a performance street cam and the second is using a economy cam. Street perf looks closer to stock numbers, with the numbers and RPM peaks being almost right on.
http://home.nycap.rr.com/agreif/Truck/DD_street.jpg
http://home.nycap.rr.com/agreif/Truck/DD_econ.jpg
