How's it going, im kinda new to performance mods but I think im ready to start
Working on my truck, its a 01 silverado extended cab 4x4 I defenetly want to get a cam
and maybe get some work done to the heads, just don't now where to start so any
advice would b appreciated
Welcome! We need pics and more info. ie. Motor, existing mods, expectations, purpose of truck, etc.
ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06
waiting to go in... 3.90s, 214/220cam
No matter what plan on these items, cam, stall, and tune.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
6.0 its heavy u need that extra hp to get tha tank rollin!
456 gears
Don't forget you always need hardened pushrods with a cam and if you go any bigger than probably .520 on lift you need LS6 springs and any bigger than about .560 you need to think about maybe some PAC dual springs and titanium retainers. If you have an open rear end you'll need a LSD to put the power to the ground, suggest the Truetrac.Originally Posted by LamboDoNoMo
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Its completely stock
5.3 or 4.8? Valuetrac, 4.10s, Bolton's(cai, exhaust, etc), 220ish cam, 3200stall from circle d and a good custom tune. Where are you located? Pics!?
Goin off the SN im gonna say texas.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
Im in las cruces nm
Posting Permissions
Reply With Quote
