I just installed a 5.3 in my 1990 suburban and I need help finding what color wire and where to connect it to the truck harness to make the speedometer work? I have found the wire from the pcm /speedometer feed wire, just need where to connect it. Thanks for any help.
behind the glove box in a white plug.. light blue and white i believe..
Looking for a 05-07 Ext Cab or Crew Cab Chevy or GMC with some mods.. PM if you have anything
I did a 92 and 93 conversion but for some reason I believe the 88-91 was missing the 3" square white box behind the glove box. If you have that box, cut the light blue with black stripe wire and tie it into the one coming from the PCM. Cut it on the side of the white box closest to the driver.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Thanks a lot that’s just the info I needed.
<div class='quotetop'>QUOTE(RedHeartbeat @ May 1 2007, 04:01 PM) [snapback]91988[/snapback]</div>What if you don't have that box? I have an 89 Silverado that I am droping a 98 Vortec 454 and 4L80-E into....I believe the 88-91 was missing the 3" square white box behind the glove box. If you have that box, cut the light blue with black stripe wire and tie it into the one coming from the PCM. Cut it on the side of the white box closest to the driver.
[/b]
Pete
2002 Chevrolet Silverado
2002 Pontiac Trans Am WS.6
2004 Dodge Ram CCSB Cummins Turbo Diesel
1989 Chevrolet Silverado RCSB - Work Truck, Vortec 454 swap in progress :rocking:
1972 Toyota FJ-40
1963 Chevrolet Corvette Prostreet
I don't know. My buddy has a 89 too and I let him figure that one out.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
<div class='quotetop'>QUOTE(xXxSilveradoxXx @ May 3 2007, 05:45 PM) [snapback]92242[/snapback]</div>On the 88-91 c/k's the DRAC/VSS buffer is built into the instrument cluster.What if you don't have that box? I have an 89 Silverado that I am droping a 98 Vortec 454 and 4L80-E into.
[/b]
That probably is of no help to you.
<div class='quotetop'>QUOTE(swampy @ May 1 2007, 04:28 PM) [snapback]91981[/snapback]</div>Didn't the 90 Subs. still have a cable driven speedo?I just installed a 5.3 in my 1990 suburban and I need help finding what color wire and where to connect it to the truck harness to make the speedometer work? I have found the wire from the pcm /speedometer feed wire, just need where to connect it. Thanks for any help.
[/b]
1990 SWB 2000 5.3l 4l60e
It's in just tieing up the loose ends.
The 90 suburban speedometer is electric. Would their be a problem if I spliced into the wire just behind the cluster?
Posting Permissions
Reply With Quote
