Forum: DynoData

Ok guys, had it on the dyno this afternoon. I'm happy so far with the results. I changed the spring out with a 7lb spring. Dyno and gauge is...

Does anybody know the drivetrain losses on my stock truck in percent? LM7 5.3l 4L60E Part Time Transfer Case 3.73 Gears 265/75R16 Tires The...

Well I strapped the hooptie to the rollers today. I was pretty happy. The dyno was a dynojet at PSI performance here in San Antonio. I will load the...

Well i finally dynoed my truck today. heres the numbers 203.00RWHP 264.60RWTQ @13.7 A/F ratio first run was the best, second run the truck...

Finally got it on the dyno today, first time it's ever been on the dyno lol. Setup: '94 Chevy, PGlige, stock rearend, 408forged, stock heads, 23x...

I dyno'd my truck last week on a dynojet and want to hear some of your opinions. It has catback, open filter, and tune mated to a 4l60e. I don't...

What should I be at with the new forged 346 set-up, -5cc dished pistons, 317 heads and 10 psi?? Over 500rwhp?

:eek: on 20 psi but ran out of fuel pump and injectors......112% duty cycle almost 900

i dyoned my truck 2 days ago on md dyno which is less 13% than dynojet the number i had was 450hp 480tq soon i will upload the sheet soon i will dyno...

After getting the A/F right and playing with the spark tables we were able to get 251.4 hp and 285.19 tq on a dynojet. I feel like these numbers are...

350rwhp 377rwtq 408cid -10cc dish on pistons. Zero milling on heads. 221 229 595 600 113 stock 5.3 upper end (243 heads) 4X4 Trail Blazer LT...

452hp 416 tq unlocked 518 464 locked

All stock, just a magnaflow muffler, made 230hp / 228tq We'll get it dyno'd next week and see what the new shorty headers and air box mod makes....

well today I finallygot the truck on the dyno and impressed with the numbers, 324hp 304tq. tell me what you guys think

This is only 11psi, but i'm considering bumping up the boost to 13 or 14psi. What do you guys think?

474hp 977tq mods in sig

LS2 Engine L92 Cylinder Heads - GM High Tech Performance

I will be getting my first dyno pulls tomorrow morning at Nelson's. I'll post numbers later. "If there not too bad"

So I took the truck to the Dyno. I had a friend do a custom tune. The truck pushed out 253 hp and 272 tq. The truck has a few more mods done to it,...