Forum: DynoData

i brought my o2 silverado ext cb with cst exh,program,and cold air intake to jannetty perf. and it made 278.5 at the rear wheels on an 80 degree day...

My 89' Sierra on dyno at Gearhead Performance in Bangor Maine. This is without Nitrous and after the install of the LS6 cam and Springs. I took...

The last time I had my truck on the dyno, it was tested in third gear. I've got 3.42's and the speedo showed 135 mph after the pull!:eek: I'm...

Amazon.com: Dyno-Proven GM LS1 Thru LS7 Performance Parts (S-A Design): Books: Richard Holdener Here's a good reference for those that want to...

So what are the average numbers for a stock 2006 5.3 4x4? What should they be after a trick front mount turbo kit? Thanks, Dan

2006 1500HD 218/224 comp cam 114lsa K&N Flowmaster 40 Hptune injectors are at 180% i am looking into some 42# injectors i should get about...

Anyone been reading the HOTROD magazine dyno testing of the LQ9 engine? They are starting with a stock LQ9 on an engine dyno and going from there. ...

Here are the results and what they had running... New LQ9 crate engine on an engine dyno 5w30 oil Dynatech headers with 2.5" exhaust, dual...

Ok well i'm trying to pick a cam for the 5.3l in the rcsb i bought. I know i could run a 220/220 or whatever but i'm wanting to see some dyno charts...

Here you go, I wanted to see what kind of gains could be had from a new Av. I wasn't too interested in getting every last hp, we're doing...

I broke away from work long enough to get some numbers today. I was hoping to make a little more horsepower but on motor alone at 86 degrees 30%...

Before the crank pulley bolt decided to back out and filled the oil pan with metal filings...

please look @ my list of motor mod's and give me an amount of hp gained. i was wondering because i'm in the process of adding a 160 t stat, hkr...

Hello, I wanted to announce a new pricing plan we have at Nelson Performance. Effective today, we have lowered our programming price!! ALL...

Well i showed up with at least 25 lightnings :flipoff: Any way 2nd pull 287hp and 341 torque @5600 big change from tuning and exhaust :rock: Red...do...

YOU BET YOUR DAMN ASS THEY DO! I knew large tires lowered output a little bit on the dyno, but check this out. foggy had his trucK on the dyno,...

Here is my dyno with mods now Doug's LT Headers Polished Magnaflow Muffler, Cutout, NGK TR6IX,160*T-Stat,EFI Live Custom Tune by Chuck of Corvettes...

Well the other weekend a local board i am on Did a Dyno Day and we got a decent deal on three pulls Well my best was 273 rwhp and 303 rwtrq which...

I got 302 RWHP and 328 RWTQ and only 3 PSI of boost. Not to shabby so far. I'm suppose to be at 9 PSI but i think i have a bad bypass valve or...