Forum: Powertrain

Broke my diff last night doing smokey burnouts bad thing I didn't get any video. Time for a truetrac should I go with 410 or stay with the 373? I...

Who is making a fuel rail for the L92 truck intake? :ugh2:

Looking at getting the Derale unit. Are they good? I was going to get a Trick Flow to match the rear end, but the Derale has a bung already in it...

I'm going to put a 6.2 in my 2000 chey and I want to make sure I'm going to have everything befor I drop it in thin again I don't know what all I...

Hey folks. I need some help. I suppose a cure for laziness would work, but thats not what I'm interested in acquiring. I need some basic...

i was using the stock manifolds on my 82 c10 LS swap, but i recently bought some 2002 ls1 camaro headers the pass side fit good, the problem is the...

well i posted over on PT about this , still havent found the issue, even bought a ATSG book that came in today which seems to be a waste of money, it...

now that i got the bed off thinking on relocating my shocks and replacing with coil overs...questions are which spring rate do i need..the 100 or...

first question i found a 05 4l80 for 150$ but it was in a fire and the plug ins are melted, worth the headache or not second what are the must have...

my grandpa brought his truck by my house and his trucks ac is not blowing cold. he just had the ac flushed, new ac compressor, new dryer, leak...

well right now i have 373 and 33, i get 11 around town and about 12.5 on the highway. Averaging 75 mph. I have a set of 456 waiting to be put in and...

Recently acquired 99 lq4. I have two options, buy a hella expensive torque converter to match to my 4l60e, or install a 4l80e. I already know that...

finally getting ready to do some shopping for my engine and tranny swap. specifically though, what are some things that i need to look out for as...

so not sure if right place for this post but oh well, looking for E-fans to replace the stock belt driven ones, saw nelson performance harness but as...

So for those of you who don't know, here is my setup: -2003 Silverado 1500 (originally with 4.8 V8) -6.0 LQ4 Swap -STOCK 4l60e -4.56 Gears, 35"...

This is kinda long, sorry!!! Okay so i picked up a 02 2500hd 6.0 4x4 from a guy who said it sucked in water needed a new motor. When i popped the...

i have had hell with my brakes. first i take it to have my brakes vaccumed sucked because i have air in my brake lines. then abs was out got a new...

Just got my flowmaster cut of and a magnaflow installed.Big difference i love it. Thanks Ray@NP

This is for my daily truck, having trouble getting it to seal up and was looking for advice. 2004 GMC 1500 Stock 5.3L Hit a stump while...