Forum: Powertrain

so i notice a ticking noise coming from number 7 header tube it goes away when engine is warm at idle but you can hear it when you give it gas going...

I was wondering if the 09-10 posi trac that GM has on the trucks work on a 00 rcsb silverado? I would like to know if he splines are the same? Thanks

http://ls1tech.com/forums/manual-transmission/1513422-how-prolong-life-your-clutch.html Interesting stuff.

I am about done buying parts for a 5.3 build, It was suggested to me to get LS7 lifters. What gain is there in these lifters compared to stock 5.3's?...

Is there a plug I can use to put my gauge sender in a 4L80e like there is on a 4L60e? I couldn't really find any info. Also, would a deep pan clear a...

Ok, when I did my fuel system, details in my build thread, I removed all the evap stuf except the lines. I am having problems filling the tank, it...

So with some fancy craigslist work, luck and some phone calls I ended up with a 6.0 and ls3 heads for nothing. It started off with selling a 4l60...

Anyone on here tried the Wilwood rear disk kit like seen HERE It seems reasonable considering it includes the bracket, rotor, 4-piston calipers,...

So I picked up this motor for my dad from a guy who passed away's daughter. Basically she has no idea where it came from. It has 799 heads and...

Just wondering a few things..first off some of you know I'm running a built 4l60 4wd behind my 6.0l..this is the second time it's started to...

hey fellas! after 147k miles i decided to do a compression test to see where i stand..i did the test and found that all my cyl. are at 164psi +- 4...

Hey just wondering if the output shaft on the 4x4 700r4 is the same as the 4x4 4l60?

My buddy has a set of ls3 heads he wants to get milled and worked over a little bit, wheres a good machine shop?

Last summer I took my truck out for a cruise and it bogged and locked up tight on me. come to find out the oil pump went out and i lost oil pressure....

Like the title says, how do I replace the reverse servo piston in my 4l80e? All i find when I google it is the reverse problem. Cant find anything on...

i found a LQ9 6.0 for $1000 with 70000 miles on it just the motor is this a good deal and should i rebuild it befor i put it in my truck?

looking for a place to take my truck to get it align in the Austin area it is 01 1500 with a drop any help out there? Robert

was thinking about getting a set of studs to use on the headers and was wondering if anybody can reccomend any? i see the ARP set but i'm not paying...

I was wondering if it would be worth it to change my single piston rear brakes to the dual piston?