Forum: Powertrain

I'll try and keep the story short, not happening(problem has been since early September)...but thought you guys would like to hear the...

Ok, so I'm taking the g/f home, and when I go to take off it feels like the truck is towing something. I look around, tow/haul isn't on and my...

I just got done installing a procharger on an 04 escalade. I am having alil problem with blow by. It seems that the dipstick is beeing blown upward....

Called up comp cams today and put in my order, I decided to go with a 230/228-.592/.588 -114. Should run pretty nice with that cam. I got some 918...

brain fart :eek: an ls1 5.7 cam part# can be used i a 6.0? like from comp cams or some thing like that . what im trying to ask is are they inter...

My truck dyno'd at 409 hp and 540 ft.lb. of torque on a Nelson tune (with a little more mods). After the dyno I pulled a couple degrees of timing b/c...

Ok so the blower is in As the title says I need solid advice here, plenty of time really, however, I'd like to have all this ready to go end of...

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...7942889571&rd=1 I'm going to a 4.56:1 ratio, but I'm wondering about the quality of the gear and what...

The wife has a 95 Blazer with push button 4 wheel drive. We just had a good snow here in Arkansas and the wife's Blazer won't go into 4 Hi.. 4 Lo...

:burnout: :burnout: :burnout: :burnout: :burnout: ^^^^^^^^^^^^^^^^ That's what my 2500HD does from a rolling 5mph at 3/4 throttle Hot...

:cry: well i have a whine from the tranny. talked to precision today and they are telling me that i need to send in the verter. they are thinking a...

Bought a few recycled parts to add to the LS1 5.7L in my truck.....and some new parts for the install 2002 LS1 head with 8k on them Comp Cams 918...

hello,newbe here on this forum,I have been asking around and cannot get a direct answer on the following..ok here goes.. I have a 03 excab stepside...

Ok i've been reading these forums for awhile, and i'm looking to buy a pickup(finnaly gave up on the 75 firebird i built up). Something like a 99 to...

well i went to san antonio to jag performance to meet up with joe and family. joe got all the bugs worked out on the tranny. and thanks again for a...

I am going to fix that leak known as niagra falls from the water pump gaskets (im guessing that or from the intake) on my truck. since im going to...

anyone have a writeup, pics, or just some tips on installing a 160 degree thermostat? for my '04, it uses the stock housing, and I just replace the...

How much did you're cam knock off you're 1/4 mile time. And what time do you think I will run with mods in sig and a Yank TT3000 and a descent cam...

hey fellas quick one. about how duration and lift on these cams before you start hearing the cam cause i want to hear it loping a good bit holla...

ok im used to setting valves on older small blocks with regular hyd. cams which its a feel kinda thing you gotta kinda guess. or with a solid lifter...