Engine | Transmission | Drive Axle | Chassis | Fuel
got the code scanned and got 0446, PCm has determined that a malfunction exists in the electrial curcuit for the vent control in the evaporative...
who has the best price on the edelbrock 61969 heads. I'm just do research so when i'm ready to buy them I know where to go.
Does anyone know where I can get a 255-HP in tank with install kit for our trucks?
so im about to start putting my motor together and i am going fi and i was told that u should run at least a dual spring with at least 180 seat...
I was wondering if anyone is running the addco sway bars and if they have any regrets??? I was also wondering if the Hotchkis are worth the extra...
Well my tranny is acting up...I have called a few of you guys for advice and am just wanting more before I do anything... The problem that has...
'05 Z-71 crew-cab 5.3 appx 56XXX miles When I turn the steering wheel (left or right) while moving, there is a knocking noise that I can feel...
Hey guys, Well ive read alot about how our 4l60e's are crap, but amazingly enough mine has held up to alot of abuse and hard miles. Still shifts...
Not sure if many have seen this, But for the newbs, Its a good idea of how everything goes. YouTube - GM Corvette Engine Assembly LS2
I'm going to be doing my cam/spring swap soon and I just want to have all the steps down so I make sure I do everything right and don't break...
I am going to be putting in a tru trac in the next 2 months. I was wondering if swaping from the 3.23's to maybe some 3.73 would be a good idea. Or...
How much oil pressure should I have on this motor? It idols at around 60psi and jumps in upward of 75psi when running it hard. This seems kinda high...
2000 5.3L 2wd, runs ok part throttle but seems to just make a lot of noise past that--revs come up as they should, but doesn't feel like it's making...
01 5.3L. Having a problem with the ole 5.3. During normal throttle and acceleration it is perfectly fine. When i put a load on the motor all hell...
idk much about cams but i can get it cheap... heres some info on it.. Camshaft LUNATI used in chevys #00012 18302 108
What should the fuel psi be running on a 2005 chevy 1500 5.3L? Also what would cause the fuel pressure to go down not up when you press on the gas...
I have heard you can put 8.1 liter injectors into a 5.3 liter. Has anyone done this or even know if it is possible? How hard is it, and what all...
I'm running out of options. I put in a 34" radiator. I put in a TBSS waterpump with t-stat. I put Virgils reservoir cap on to make sure my...
i Blew my rear end going WOT over a bump i didnt see my shakles are jacked and my spider gear in my diff was shattered and shot out my diff along...
Does anybody else have this damn problem? Everytime I start my truck I hear a ticking noise coming from behind my dash. I dont know if it the fan or...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules