Forum: Powertrain

My '02 Tahoe LT does not have a trans temp gauge. I was looking at Digital Dash Solutions on ebay and was looking at their new clusters for my truck....

I was wondering if anyone has used a stall converter from monster transmissions. They got them for 400$ for a 4l80. They any good?

How much does everyone usually mill on thier heads? I am leaning torwards a 243 head on a 5.3 but may go with the 862s. I want to have high...

Anything I should look for? What yrs are better? Out of which vehicale? I have a 99 silverado 4x4 with a 2003 6.0. I think I read somewhere there...

So last night after work on the way home I filled my truck up with 93octane ethonal. I normally dont use ethonal, but had to since I was far from...

Guys, since I'm probably fine tuning my ride on the single 76 turbo, boosting probably 12-15 psi, I want to Go to a monster 4L80E now, so when Allen...

Well i promised a few of you guys that i would do a little first drive write up on the 4l60 to 4l80 difference. So here it is: First off I started...

A friend was doing an underdrive pulley swap on his truck and had the pulley bolt break off inside the crank, used an easy out to pull out the bolt...

well my dad has 35+ years rebuilding and installing trannys mostly gm.My question is can someone point me in the direction of a build kit for a...

When I turned the dial to the hot position on the AC controls I get the sweet smell of coolant. I turn it on and I can still smell it. Any ideas?

The tranny is just about had it in the 4wd and I need one before winter. Who is the best to go through? I plan on some sort of forced induction come...

Was looking to see if anyone had bored there 325 to a 365? Believe the 5.3 and 6.0 have the same stroke, different bore. 3.72 vs 4.00. Anyone...

Found a new 2004 LS1 cam for $60. Never used. Numbers are little different than what i thought... 196/201 467/479. Is this gonna be of help? And...

So me and a few buddies went muddin' yesterday, and one of 'em has a ford. After we got done muddin' he told me that it felt like it was drivin...

I was reading quiks 4.8 high boost thread over on pics/videos. It got me thinkin. My motor is forged, but I still have the stock returnless style...

What are the cam specs for the lq4 and lq9? Also the vettes? Just looking for some factory used cams for my mild 4.8 build....planning on yellow...

I thinking bout getting a cam for my truck, what would be a good cam for street, and some strip? the motor is stock except for a nelson tune. open to...

Been thinking about getting an Edge stall for my 4l80,was wondering if anyone has had any issues with them,or if i should get a different brand?

im planning to do a swap on my 06 cc 5.3 but i dunno whats needed...i know i need intake manifold tb tb conversion harness but i dunno what...

ok as some of you know im building a 6.0 and doing l92 heads/intake, i got the l92 intake and was looking at it and making sure everything was good...