Forum: Electrical

I have an '04 PCM layin around here and was curious if there is any advantage of it over my '01. :confused: I recall they had the ability to do...

HEy, does anyone know of a company that makes a gauge pod for the newest chevy trucks? I'm anxious to find one, as I got a friend that has an...

so i installed my own underglow with the help of my friend jeff. but when we installed it we didnt know how to wire it to an internal fuse. so we...

Heres a question for u guys, i've been looking for the Flasher light kits, for the newer GM's with the day time running lights, but can't seem to...

Ok..so you all know about my misfire....its the number 7 cylinder and pissin me off. Iv replaced the plugs with the AC Delco replacements and the...

i had E-fans installed awhile back i finally was able to get all ac parts and installed the problem i am having now is i am not about to charge the...

http://www.dashhawk.com/features.html

I am in deep sh**t here , this is a long running problem I have had here with the 2005 E-Fans and Nelson harness , Redheartbeat and a few others have...

like the title says. under acceleration and deaccleration it seems like my speedo needle is sticking a little almost as if ticking like a clock. i...

This morning I stopped and got a coke at the store and my truck had ran fine. When I jumped in it to go I turned the key and nothing. My gas gauge...

I just got done doing my LS1 swap into my 98 v-6 1500. Its running nice and I'm just finishing up last minute things to get it back on the road. I...

I have an LS1 fan setup in my truck, including a 145A alternator. Lately, anytime my ac and fan kicks on, the lights flicker, and the voltage drops....

1987 Silverado Will I need to customize the LS1 harness for my existing gauges, change to aftermarket gauges, or have to use late-model gauges? ...

I don’t think this is normal, when I turn on my incab fan with no AC, my efans cycle off and on continuously, Also does this with the AC on. Could...

I got my air/fuel gauge in and the instructions say to connect one of the wires from the gauge to the signal wire on the oxygen sensor. My question...

Could someone please post pics of the spacers they used for the motron 60lbers with a Radix,I think They are 1/2" o.d X 1/4" i.d X 5/8" long, also do...

I was driving the truck the other day with the headers open and the air bag light came on! Has anyone else had this problem and can anyone tell me...

I am trouble shooting the T case I just swapped in but I don't remember what some of the symbols mean on the diagram. Does anyone know where I might...

I have a 99 ECSB and My power locks dont work. First thaught it to be a fuse, replaced it and it worked for a few cycles and now stopped again....

Ok I just got my harness today and my Fans have been sitting here for about a month... How do and where do you mount the fans? I know right behind...