All LS Based Conversions
As you guys might no i have a 90 454ss and i fell upon a 6.0 that my buddy had in his shop and decided that that motor would look good in my truck....
Been busy chasing down loose ends after swapping a 5.3 in my 94 blazer. Got most things wrapped up except the tcc. Current did the harness and ECM,...
Well I have started to do this conversion on my 84 scottsdale c20. I am just hungup with one thing.. The trans! I wanted to use this truck to...
I have a 2004 tahoe with the 4.8L. can someone help me with what all has to be done to swap in a 6.0? what year model motor would i need to look for...
Hey folks, you have a virgin here. I have a 2002 Camaro LS1 motor, trans, and all harnesses-even the gas tank. My plans are to swap this into my...
Well...LS1 swap was a success, (NOW I NEED ADVICE). Question 1: I would love to hear everyone's opinion on which mufflers I should run on my 68...
I've got a 2000 Escalade (GMT400), with a 4L60E that's starting to make some whining/howling, so I'm fearing the worst. At some point I'd like to...
Hey guys, I hooked up my tach wire from the 2005 PCM to the white coil wire from the existing harness. I have not had any luck getting the tach...
I'm seriously debating pulling out my 6.0 single turbo and dropping in a toyota 2jz stroker engine with twin 67's. For those of you who don't know...
Hey guys, we finally got our truck up to the dyno to have our tuner work on it and we ran into an issue with it pulling serious timing due to knock,...
This is on another board that I frequent. This is an amazing build. I can't wait to see it completed. ...
Well after a year and a half I'm finally driving my pickup. I have almost 500 miles on it now and it is running really good. Have a few things to...
The engine was previously installed in a 94 ECSB truck, but removed due to the "transmission not working right". You can't use the 94 4L60E with the...
here are some final shots of the motor with the headers. Also added a brake booster and had my inner fenders powder coated jet black ...
Ok so I know this may sound weird to some of you, but my truck didn't have power brakes and while converting to the 5.3 I was given the master...
i have a 90 454 ss i got the 6.0 in my truck and i am putting a twin turbo kit but i am looking for manifolds and was wondering if any one knew where...
Hey I'm about a month into the project now. I got a ton of great info from everyone here and just wanted to post the progress and some pics... ...
I have a 87 RCSB 350 TBI/700R4, changing to 5.3/4L60E. As I understand, the 4L60E is the same externaly as the 700/R4. If I want to keep the 4L60E...
I have a complete 99 Trans-Am with a T6 TRANS. I need to know or get any advise on what i'm going to need to do to put the LS1 ENGINE in my 99 yukon...
Alright guys so I'm getting ready to start ordering parts :luv: So here's what I'm working with a 02 5.3 being put in a 95 and retaining the LT...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
