Forum: LSX Truck Conversions

Truck is a 96 S10 Extended cab, originally a 4.3 Vin X 5 speed, Z85 suspension, non ZQ8 with factory 8.5 rear axle. We have swapped in a 408LSx T56...

I've got my swap mostly done, but I don't have a working speedo and getting a P0608 code. I have mph showing on the scanner and it works on the...

I will be swaping in a 5.3 into my 1992 2wd 1500 pickup soon.I wanted to know if the new power steering pump uses the old lines or if i can use my...

i thought this build was pretty cool, we have just about finished it. it is a 92 ext cab c1500, ugly, but quick! 6.2 liter and 4L80E ms3 cam...

http://www.highflowfuel.com/i-4783523-hfp-255lph-fuel-pump-chevrolet-c1500-pickup-1988-1995.html Anyone try this fuel pump in there obs truck? ...

engine is a 07 5.3 with g5x3 lg cam milled heads custom aed holley carb 3500 stall 700r4

I have a 1993 GMC C1500 Sierra with a 5.7L V8. The truck is almost all stock except for the stereo and the muffler. Saw a tech article on swapping a...

I put an 06 lq4 in my 04 Sierra. I used the flex plate off my 5.3 to bolt up to the 60e. If I get a 4l80e will I need to go back with the lq4 flex...

On my buddies 6.0 swap we are trying to figure out which wires go to the brake module on the driver side firewall. On the engine harness there's two...

I swapped to an ls1 intake a few weeks ago and have been having major troubles with the belts throwing. I think my problem is in the alignment of the...

I want to do this swap in my 95 GMC Sierra regular cab stepside. I will most likely use a 5.3 but what have you guys been doing for a y pipe I would...

I have the oppurtunity to get a 2005 5.3 out of a van for pretty cheap and I am assuming it comes with accessories. Is there any difference between...

Hey everyone, I have been reading for awhile on here in preparation for my build. Thanks in advance for all of your help, this is an amazing site....

Im getting my parts together for my swap. Im putting an lq4 and 4l80e into my 93 blazer. I dont think I can hang my 93 t case on the 80e because it...

Lq4 swap into 04 Sierra 1500. Everything works fine other than a check engine light and truck won't warm up. Ran it for bout 10 minutes and never...

Ran into another problem. My stock transmission shift linkage from my 4l60e will not work with the 4l80e that i have in there now. What are some...

I need to make a build thread instead of making a new one for every question, so sorry bout that guys. Just running into a few small problems on my...